Hackintosh Sistemlerde Intel Speed Shift Aktif Etmek

NorthChuck

PADAVAN
8 Ocak 2018
102
1
0
@montezuma abi tüm işlemleri uyguladım acaba sorun var mı yazılardan anladığım yok gadget da da sorun yok gibi ama efi clover acpi içinde herhangi bir .aml dosyası oluşmuyor ve eğer sorun yoksa sonraki adım olan pil göstergesi nasıl ekleyebilirim

Kod:
Last login: Wed Dec 26 07:38:34 on console
1-MacBook-Pro:~ a1$ sudo -s
Password:
bash-3.2# chown -R 0:0 ~/Desktop/AppleIntelInfo.kext
bash-3.2# chmod -R 755 ~/Desktop/AppleIntelInfo.kext
bash-3.2# kextload ~/Desktop/AppleIntelInfo.kext
bash-3.2# cat /tmp/AppleIntelInfo.dat
AppleIntelInfo.kext v2.4 Copyright © 2012-2017 Pike R. Alpha. All rights reserved.

Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 1
logCStates...............................: 1
logIPGStyle..............................: 1
InitialTSC...............................: 0x226979964b0 (98 MHz)
MWAIT C-States...........................: 286531872

Processor Brandstring....................: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz

Processor Signature..................... : 0x406E3
------------------------------------------
 - Family............................... : 6
 - Stepping............................. : 3
 - Model................................ : 0x4E (78)

Model Specific Registers (MSRs)
------------------------------------------

MSR_CORE_THREAD_COUNT............(0x35)  : 0x18
------------------------------------------
 - Core Count........................... : 2
 - Thread Count......................... : 4

MSR_PLATFORM_INFO................(0xCE)  : 0x4043DF1011800
------------------------------------------
 - Maximum Non-Turbo Ratio.............. : 0x18 (2400 MHz)
 - Ratio Limit for Turbo Mode........... : 1 (programmable)
 - TDP Limit for Turbo Mode............. : 1 (programmable)
 - Low Power Mode Support............... : 1 (LPM supported)
 - Number of ConfigTDP Levels........... : 2 (additional TDP level(s) available)
 - Maximum Efficiency Ratio............. : 4
 - Minimum Operating Ratio.............. : 4

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x7E008008
------------------------------------------
 - I/O MWAIT Redirection Enable......... : 0 (not enabled)
 - CFG Lock............................. : 1 (MSR locked until next reset)
 - C3 State Auto Demotion............... : 1 (enabled)
 - C1 State Auto Demotion............... : 1 (enabled)
 - C3 State Undemotion.................. : 1 (enabled)
 - C1 State Undemotion.................. : 1 (enabled)
 - Package C-State Auto Demotion........ : 1 (enabled)
 - Package C-State Undemotion........... : 1 (enabled)

MSR_PMG_IO_CAPTURE_BASE..........(0xE4)  : 0x51814
------------------------------------------
 - LVL_2 Base Address................... : 0x1814
 - C-state Range........................ : 5 (C-States not included, I/O MWAIT redirection not enabled)

IA32_MPERF.......................(0xE7)  : 0x1F5350D4F5
IA32_APERF.......................(0xE8)  : 0x13C8779616

MSR_FLEX_RATIO...................(0x194) : 0x0
------------------------------------------

MSR_IA32_PERF_STATUS.............(0x198) : 0x1F7D00001B00
------------------------------------------
 - Current Performance State Value...... : 0x1B00 (2700 MHz)

MSR_IA32_PERF_CONTROL............(0x199) : 0x1C00
------------------------------------------
 - Target performance State Value....... : 0x1C00 (2800 MHz)
 - Intel Dynamic Acceleration........... : 0 (IDA engaged)

IA32_CLOCK_MODULATION............(0x19A) : 0x0

IA32_THERM_INTERRUPT.............(0x19B) : 0x10
------------------------------------------
 - High-Temperature Interrupt Enable.... : 0 (disabled)
 - Low-Temperature Interrupt Enable..... : 0 (disabled)
 - PROCHOT# Interrupt Enable............ : 0 (disabled)
 - FORCEPR# Interrupt Enable............ : 0 (disabled)
 - Critical Temperature Interrupt Enable : 1 (enabled)
 - Threshold #1 Value................... : 0
 - Threshold #1 Interrupt Enable........ : 0 (disabled)
 - Threshold #2 Value................... : 0
 - Threshold #2 Interrupt Enable........ : 0 (disabled)
 - Power Limit Notification Enable...... : 0 (disabled)

IA32_THERM_STATUS................(0x19C) : 0x883B0800
------------------------------------------
 - Thermal Status....................... : 0
 - Thermal Log.......................... : 0
 - PROCHOT # or FORCEPR# event.......... : 0
 - PROCHOT # or FORCEPR# log............ : 0
 - Critical Temperature Status.......... : 0
 - Critical Temperature log............. : 0
 - Thermal Threshold #1 Status.......... : 0
 - Thermal Threshold #1 log............. : 0
 - Thermal Threshold #2 Status.......... : 0
 - Thermal Threshold #2 log............. : 0
 - Power Limitation Status.............. : 0
 - Power Limitation log................. : 1
 - Current Limit Status................. : 0
 - Current Limit log.................... : 0
 - Cross Domain Limit Status............ : 0
 - Cross Domain Limit log............... : 0
 - Digital Readout...................... : 59
 - Resolution in Degrees Celsius........ : 1
 - Reading Valid........................ : 1 (valid)

MSR_THERM2_CTL...................(0x19D) : 0x0

IA32_MISC_ENABLES................(0x1A0) : 0x850089
------------------------------------------
 - Fast-Strings......................... : 1 (enabled)
 - FOPCODE compatibility mode Enable.... : 0
 - Automatic Thermal Control Circuit.... : 1 (enabled)
 - Split-lock Disable................... : 0
 - Performance Monitoring............... : 1 (available)
 - Bus Lock On Cache Line Splits Disable : 0
 - Hardware prefetch Disable............ : 0
 - Processor Event Based Sampling....... : 0 (PEBS supported)
 - GV1/2 legacy Enable.................. : 0
 - Enhanced Intel SpeedStep Technology.. : 1 (enabled)
 - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
 - Adjacent sector prefetch Disable..... : 0
 - CFG Lock............................. : 0 (MSR not locked)
 - xTPR Message Disable................. : 1 (disabled)

MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x5640000
------------------------------------------
 - Turbo Attenuation Units.............. : 0
 - Temperature Target................... : 100
 - TCC Activation Offset................ : 5

MSR_MISC_PWR_MGMT................(0x1AA) : 0x401CC1
------------------------------------------
 - EIST Hardware Coordination........... : 1 (hardware coordination disabled)
 - Energy/Performance Bias support...... : 1
 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
 - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)

MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x1B1B1B1C
------------------------------------------
 - Maximum Ratio Limit for C01.......... : 1C (2800 MHz)
 - Maximum Ratio Limit for C02.......... : 1B (2700 MHz)

IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x5
------------------------------------------
 - Power Policy Preference...............: 5 (balanced performance and energy saving)

MSR_POWER_CTL....................(0x1FC) : 0x24005F
------------------------------------------
 - Bi-Directional Processor Hot..........: 1 (enabled)
 - C1E Enable............................: 1 (enabled)

MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
 - Power Units.......................... : 3 (1/8 Watt)
 - Energy Status Units.................. : 14 (61 micro-Joules)
 - Time Units .......................... : 10 (976.6 micro-Seconds)

MSR_PKG_POWER_LIMIT..............(0x610) : 0x4200C800DD8088
------------------------------------------
 - Package Power Limit #1............... : 17 Watt
 - Enable Power Limit #1................ : 1 (enabled)
 - Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1)
 - Time Window for Power Limit #1....... : 110 (163840 milli-Seconds)
 - Package Power Limit #2............... : 25 Watt
 - Enable Power Limit #2................ : 0 (disabled)
 - Package Clamping Limitation #2....... : 0 (disabled)
 - Time Window for Power Limit #2....... : 33 (10 milli-Seconds)
 - Lock................................. : 0 (MSR not locked)

MSR_PKG_ENERGY_STATUS............(0x611) : 0x23417BA
------------------------------------------
 - Total Energy Consumed................ : 2256 Joules (Watt = Joules / seconds)

MSR_PP1_POWER_LIMIT..............(0x640) : 0x0

MSR_PP1_ENERGY_STATUS............(0x641) : 0x91E55
------------------------------------------
 - Total Energy Consumed................ : 36 Joules (Watt = Joules / seconds)

MSR_PP1_POLICY...................(0x642) : 0x18
------------------------------------------
 - Priority Level....................... : 24

MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x17
MSR_CONFIG_TDP_LEVEL1............(0x649) : 0x8003C
MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0x1800C8
MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x0
MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0
MSR_PKGC3_IRTL...................(0x60a) : 0x884E
MSR_PKGC6_IRTL...................(0x60b) : 0x8876
MSR_PKGC7_IRTL...................(0x60c) : 0x8894
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x769E9552F0
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x165C5EF7FB8
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x769E9552F0
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x165C5EF7FB8
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0
MSR_PKG_C7_RESIDENCY.............(0x3fa) : 0x0

MSR_PLATFORM_ENERGY_COUNTER......(0x64D) : 0x32C4BA6
------------------------------------------

MSR_PPERF........................(0x64E) : 0x11E4D9E61E
------------------------------------------
 - Hardware workload scalability........ : 76853929502

MSR_CORE_PERF_LIMIT_REASONS......(0x64F) : 0x10001000
------------------------------------------
 - PROCHOT Status....................... : 0
 - Thermal Status....................... : 0
 - Residency State Regulation Status.... : 0
 - Running Average Thermal Limit Status. : 0
 - VR Therm Alert Status................ : 0
 - VR Therm Design Current Status....... : 0
 - Other Status......................... : 0
 - Package/Platform-Level #1 Power Limit : 0
 - Package/Platform-Level #2 Power Limit : 0
 - Max Turbo Limit Status............... : 1 (frequency reduced below OS request due to multi-core turbo limits)
 - Turbo Transition Attenuation Status.. : 0
 - PROCHOT Log.......................... : 0
 - Thermal Log.......................... : 0
 - Residency State Regulation Log....... : 0
 - Running Average Thermal Limit Log.... : 0
 - VR Therm Alert Log................... : 0
 - VR Thermal Design Current Log........ : 0
 - Other Status Log..................... : 0
 - Package/Platform-Level #1 Power Limit : 0
 - Package/Platform-Level #2 Power Limit : 0
 - Max Turbo Limit Log.................. : 1 (status bit has asserted)
 - Turbo Transition Attenuation Log..... : 0
HDC Supported

IA32_PKG_HDC_CTL.................(0xDB0) : 0x1
------------------------------------------
HDC Pkg Enable...................(0x652) : 1 (HDC allowed)

IA32_PM_CTL1.....................(0xDB1) : 0x1
------------------------------------------
HDC Allow Block..................(0xDB1) : 1 (HDC blocked)

IA32_THREAD_STALL................(0xDB2) : 0x0

MSR_PKG_HDC_CONFIG...............(0x652) : 0x2
------------------------------------------
Pkg Cx Monitor ..................(0x652) : 2 (count package C3 and deeper)
MSR_CORE_HDC_RESIDENCY...........(0x653) : 0x0

MSR_PKG_HDC_SHALLOW_RESIDENCY....(0x655) : 0x0

MSR_PKG_HDC_DEEP_RESIDENCY.......(0x656) : 0x0

IA32_TSC_DEADLINE................(0x6E0) : 0x2269D5FA2EE
MSR_PPERF........................(0x63E) : 0x1 (22)

IA32_PM_ENABLE...................(0x770) : 0x1 (HWP Supported and Enabled)

IA32_HWP_CAPABILITIES............(0x771) : 0x10E171C
-----------------------------------------
 - Highest Performance.................. : 28
 - Guaranteed Performance............... : 23
 - Most Efficient Performance........... : 14
 - Lowest Performance................... : 1

IA32_HWP_INTERRUPT...............(0x773) : 0x0
------------------------------------------
 - Guaranteed Performance Change........ : 0 (Interrupt generation disabled)
 - Excursion Minimum.................... : 0 (Interrupt generation disabled)

IA32_HWP_REQUEST................(0x774) : 0x80002301
-----------------------------------------
 - Minimum Performance................. : 1
 - Maximum Performance................. : 35
 - Desired Performance................. : 0
 - Energy Efficient Performance........ : 128
 - Activity Window..................... : 0, 0
 - Package Control..................... : 0

IA32_HWP_STATUS..................(0x777) : 0x0
-----------------------------------------
 - Guaranteed Performance Change....... : 0 (has not occured)
 - Excursion To Minimum................ : 0 (has not occured)

CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......:  4 ( 400 MHz)
Maximum non-Turbo Ratio/Frequency........: 24 (2400 MHz)
Maximum Turbo Ratio/Frequency............: 28 (2800 MHz)

IGPU Info:
------------------------------------------
IGPU Current Frequency...................:    0 MHz
IGPU Minimum Frequency...................:  300 MHz
IGPU Maximum Non-Turbo Frequency.........:  300 MHz
IGPU Maximum Turbo Frequency.............: 1000 MHz
IGPU Maximum limit.......................: No Limit

P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ (7) 15 27 ] iGPU P-States [ ]
CPU C3-Cores [ 0 2 3 ]
CPU C7-Cores [ 0 1 2 3 ]
CPU P-States [ (5) 7 15 27 ] iGPU P-States [ ]
CPU C3-Cores [ 0 1 2 3 ]
CPU P-States [ 5 (6) 7 15 27 ] iGPU P-States [ ]
CPU P-States [ 5 (6) 7 15 27 ] iGPU P-States [ (6) ]
CPU P-States [ 5 6 7 (11) 15 27 ] iGPU P-States [ 6 ]
bash-3.2# kextunload ~/Desktop/AppleIntelInfo.kext
bash-3.2#
LENOVO V310 80SYATX i5 6200u HD520 4GB 2133 RAM Realtek ALC236 Realtek 8168 ETHERNET QC9377 BLUETOOTH //MOJAVE 10.14

Uykudan geç uyanmama sorunu da yaşıyorum
 

montezuma

MASTER YODA
Yönetici
19 Eki 2016
19,673
4,678
4,401
Clover içinde herhangi bir dosya oluşmaz. Bu dosya kök dizinde oluşturulur, ve bunu alıp EFI / CLOVER içine kopyalarsın. Ek olarak kext olarak NullCPUpowermanagement varsa bunu kaldır.
 

AirLife

PADAVAN
20 Mar 2017
141
9
71
21

Bu konu ile farkı ne acaba ? Yukarıdaki konudaki işlemi yapıyordum normal de. Şu an yapmadım hangisini yapmalıyım, fark eder mi ?
 

AD Engelleyici Tespit Edildi

Anlıyoruz, reklamlar can sıkıcı!

Elbette, reklam engelleme yazılımı reklamları engelleme konusunda harika bir iş çıkarsa da, web sitemizin faydalı özelliklerini de engeller. En iyi site deneyimi ve bize destek olmak için lütfen AdBlocker’ınızı devre dışı bırakın.

AD Reklam Engelleyiciyi Devre Dışı Bıraktım
Hayır teşekkürler