Hello, I would like to present a problem I encountered while trying to install macOS (Hackintosh) on my Lenovo Legion 5 15ach6h laptop. The device is equipped with an AMD Ryzen 7 5800H processor and an NVIDIA GeForce RTX 3060 GPU. The issue I’m currently facing is that the system gets stuck at a black screen after executing the installation commands, and the usual options such as Disk Utility or macOS Recovery do not appear.
I will provide all the necessary technical details to help you fully understand the problem, and I kindly request your assistance in finding a solution.
Steps Taken So Far
Detailed Description of the Problem
Additional Technical Information
I will provide all the necessary technical details to help you fully understand the problem, and I kindly request your assistance in finding a solution.
Steps Taken So Far
- Preparing the Installation File:
- I used the Sequoia 15.3.1.raw file, which I downloaded from the following link:
https://www.mediafire.com/file/eh533i3oqyupfdb/Olarila+Sequoia+15.3.1.raw/file - I flashed this file onto a USB drive using BalenaEtcher .
- I used the Sequoia 15.3.1.raw file, which I downloaded from the following link:
- Setting Up the EFI Folder:
- I attached my full EFI folder, which contains all the necessary modifications to support my hardware.
- I also attempted to install Sequoia 15 using OpenCore with the following command:
python3 ./macrecovery.py -b Mac-937A206F2EE63C01 -m 00000000000000000 download
- Executing the Installation Process:
- After preparing the USB drive and EFI folder, I entered the BIOS and enabled UEFI Boot while disabling Secure Boot .
- Upon booting the system with the USB drive, a black terminal-like screen appeared where I executed the necessary commands to start the installation process.
- The problem began after the commands finished executing, as the system got stuck on a black screen. It was expected that the options for Disk Utility , macOS Installer , and others would appear, but they did not.
Detailed Description of the Problem
- The Black Screen: After the commands were executed, the system remains stuck on a black screen without any error messages or available options.
- Missing Expected Options: The menu containing Disk Utility , macOS Installer , and other options does not appear at all.
- Previous Attempts to Solve the Problem:
- I verified the integrity of the installation file and confirmed it was correctly flashed onto the USB drive.
- I updated the EFI folder multiple times to ensure compatibility with my hardware.
- I tried different versions of OpenCore, but the issue persisted.
Additional Technical Information
- Current Operating System: Windows 11
- Processor: AMD Ryzen 7 5800H
- Graphics Card: NVIDIA GeForce RTX 3060
- RAM: 16GB
- Storage: 512GB NVMe SSD
- Target macOS Version: Sequoia 15.3.1
Moderatörün son düzenlenenleri:
