0:100 0:100 MemLog inited, TSC freq: 2594107166
0:100 0:000 LegacyRegion2: Chipset/proc: 0x01548086
0:100 0:000 Next Generation Core processors (PAM 0x80-0x86)
0:100 0:000 Test PAM1=(0x41=90, 0x5a=10, 0x81=11, 0x91=00) at chipset 01548086
0:100 0:000 , Install = Success
0:113 0:013 BiosVideoDriverBindingStart!
0:113 0:000 BiosVideoCheckForVbe
0:113 0:000 EdidOverride not found
0:125 0:012 Edid1+
0:125 0:000 found Detail Timing 1600x900
0:125 0:000 found Detail Timing 1600x900
0:137 0:012 Edid0+
0:137 0:000 found Detail Timing 1600x900
0:137 0:000 ... already present
0:137 0:000 found Detail Timing 1600x900
0:137 0:000 ... already present
0:138 0:000 0 1024x768 attr=9B - ok, edid-, 1024x768, working, highest, pref=0
0:138 0:000 1 640x480 attr=9B - ok, edid-, 640x480, working
0:138 0:000 2 800x600 attr=9B - ok, edid-, 800x600, working
0:138 0:000 3 1600x900 attr=9B - ok, edid+, working, highest, pref=3
0:138 0:000 BV new mode: 3 1600x900
0:309 0:171 SetMode pref 3 (3) = Success
1:955 1:645
1:955 0:000 Now is 13.12.2019, 11:23:24 (GMT)
1:955 0:000 Starting Clover revision: 5099 (master, commit 6852bd3a) on CLOVER EFI
1:955 0:000 Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED -t GCC53 | -D NO_GRUB_DRIVERS_EMBEDDED --conf=/Users/sergey/src/Clover/Conf -D USE_LOW_EBDA -a X64 -b RELEASE -t GCC53 -n 5 | OS: 10.14.6]
1:955 0:000 SelfDevicePath=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,FE28E2A8-8B1A-45A1-A729-910769780ABE,0x28,0x64000) @1F4C6A98
1:955 0:000 SelfDirPath = \EFI\CLOVER
1:955 0:000 SimpleTextEx Status=Success
1:955 0:000 === [ Get Smbios ] ========================================
1:955 0:000 Type 16 Index = 0
1:955 0:000 Total Memory Slots Count = 2
1:955 0:000 Type 17 Index = 0
1:955 0:000 SmbiosTable.Type17->Speed = 1600MHz
1:955 0:000 SmbiosTable.Type17->Size = 4096MB
1:955 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 Bottom-Slot 1(top)
1:955 0:000 SmbiosTable.Type17->Vendor = ADATA
1:955 0:000 SmbiosTable.Type17->SerialNumber = 00016C5E
1:955 0:000 SmbiosTable.Type17->PartNumber = AM1L16BC4R1-B1GS
1:955 0:000 Type 17 Index = 1
1:955 0:000 SmbiosTable.Type17->Speed = 1600MHz
1:955 0:000 SmbiosTable.Type17->Size = 4096MB
1:955 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 Bottom-Slot 2(under)
1:955 0:000 SmbiosTable.Type17->Vendor = ADATA
1:955 0:000 SmbiosTable.Type17->SerialNumber = 00016B9C
1:955 0:000 SmbiosTable.Type17->PartNumber = AM1L16BC4R1-B1GS
1:955 0:000 Boot status=0
1:955 0:000 Running on: 'HP EliteBook Folio 9470m' with board '18DF'
1:955 0:000 === [ GetCPUProperties ] ==================================
1:955 0:000 CPU Vendor = 756E6547 Model=306A9
1:955 0:000 The CPU supported SSE4.1
1:955 0:000 BrandString = Intel(R) Core(TM) i7-3687U CPU @ 2.10GHz
1:955 0:000 The CPU supported turbo
1:955 0:000 MSR 0x35 20004
1:955 0:000 MSR 0xE2 before patch 1E008404
1:955 0:000 MSR 0xE2 is locked, PM patches will be turned on
1:955 0:000 MSR 0xCE 00080815_F0011A00
1:955 0:000 corrected FLEX_RATIO = 180000
1:955 0:000 MSR 0x1B0 00000000
1:955 0:000 FSBFrequency = 100 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz
1:955 0:000 MaxDiv/MinDiv: 26.0/8
1:955 0:000 Turbo: 31/31/31/33
1:955 0:000 Features: 0xBFEBFBFF
1:955 0:000 Threads: 4
1:955 0:000 Cores: 2
1:955 0:000 FSB: 100 MHz
1:955 0:000 CPU: 2600 MHz
1:955 0:000 TSC: 2600 MHz
1:955 0:000 PIS: 100 MHz
1:955 0:000 ExternalClock: 25 MHz
1:955 0:000 === [ GetDevices ] ========================================
1:955 0:000 GOP found at: PcieRoot(0x0)/Pci(0x2,0x0)/AcpiAdr(0x80010100)
1:955 0:000 PCI (00|00:00.00) : 8086 0154 class=060000
1:955 0:000 PCI (00|00:02.00) : 8086 0166 class=030000
1:955 0:000 - GOP: Provided by device
1:955 0:000 - GFX: Model=Intel HD Graphics 4000 (Intel)
1:955 0:000 PCI (00|00:14.00) : 8086 1E31 class=0C0330
1:955 0:000 PCI (00|00:1A.00) : 8086 1E2D class=0C0320
1:955 0:000 PCI (00|00:1B.00) : 8086 1E20 class=040300
1:955 0:000 PCI (00|00:1C.00) : 8086 1E10 class=060400
1:955 0:000 PCI (00|00:1C.02) : 8086 1E14 class=060400
1:955 0:000 PCI (00|02:00.00) : 197B 2392 class=088000
1:955 0:000 PCI (00|02:00.02) : 197B 2391 class=080501
1:955 0:000 PCI (00|00:1C.03) : 8086 1E16 class=060400
1:956 0:000 PCI (00|03:00.00) : 168C 002B class=028000
1:956 0:000 - WIFI: Vendor=Atheros
1:956 0:000 PCI (00|00:1D.00) : 8086 1E26 class=0C0320
1:956 0:000 PCI (00|00:1F.00) : 8086 1E55 class=060100
1:956 0:000 PCI (00|00:1F.02) : 8086 1E03 class=010601
1:956 0:000 PCI (00|00:1F.03) : 8086 1E22 class=0C0500
1:956 0:000 === [ GetDefaultSettings ] ================================
1:956 0:000 Clover load options size = 0 bytes
1:962 0:006 EFI\CLOVER\config.plist loaded: Success
1:962 0:000 === [ GetListOfThemes ] ===================================
1:963 0:000 - [00]: christmas
1:963 0:000 - [01]: embedded
1:964 0:000 - [01]: newyear
1:965 0:001 - [02]: random
1:965 0:000 === [ Found config plists ] ===============================
1:965 0:000 - config.plist
1:965 0:000 - config_eski.plist
1:966 0:000 === [ GetEarlyUserSettings ] ==============================
1:966 0:000 timeout set to 1
1:966 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0)
1:966 0:000 KextsToPatch: 1 requested
1:966 0:000 - [00]: com.apple.iokit.IOAHCIBlockStorage (Enable TRIM for non-Apple SSDs) :: BinPatch :: data len: 11
1:966 0:000 KernelToPatch: 3 requested
1:966 0:000 - [00]: MSR 0xE2 _xcpm_idle instant reboot(c) Pike R. Alpha :: data len: 8
1:966 0:000 - [01]: Disable panic kext logging on 10.13 release kernel (credit vit9696) :: MatchOS: 10.13.x :: data len: 6
1:966 0:000 - [02]: Disable panic kext logging on 10.14 release kernel (credit vit9696) :: MatchOS: 10.14.x :: data len: 6
1:966 0:000 Default theme: BGM
1:966 0:000 Hiding entries with string Preboot
1:966 0:000 === [ LoadDrivers ] =======================================
1:966 0:000 Loading ApfsDriverLoader.efi status=Success
1:966 0:000 - driver needs connecting
1:966 0:000 1 drivers needs connecting ...
1:966 0:000 PlatformDriverOverrideProtocol->GetDriver overriden
1:966 0:000 APFS driver loaded
2:163 0:196 === [ InitScreen ] ========================================
2:163 0:000 Console modes reported: 4, available modes:
2:163 0:000 - [01]: 80x25
2:163 0:000 - [03]: 100x31
2:163 0:000 - [04]: 200x47 (current mode)
2:163 0:000 SetScreenResolution: 1600x900 - already set
2:163 0:000 SetScreenResolution: 1600x900 - already set
2:163 0:000 reinit: self device path=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,FE28E2A8-8B1A-45A1-A729-910769780ABE,0x28,0x64000)
2:164 0:001 Using embedded font: Success
2:167 0:002 === [ GetMacAddress ] =====================================
2:167 0:000 === [ ScanSPD ] ===========================================
2:167 0:000 Scanning SMBus [8086:1E22], mmio: 0xD0714004, ioport: 0xEF80, hostc: 0x1
2:186 0:019 Slot: 0 Type 24 4096MB 1600MHz Vendor=A-DATA Technology PartNo=AM1L16BC4R1-B1GS SerialNo=00000001060C050E
2:205 0:019 Slot: 2 Type 24 4096MB 1600MHz Vendor=A-DATA Technology PartNo=AM1L16BC4R1-B1GS SerialNo=00000001060B090C
2:206 0:000 === [ GetAcpiTablesList ] =================================
2:206 0:000 Get Acpi Tables List from RSDT:
2:206 0:000 - [00]: FACP 18DF len=268
2:206 0:000 - [01]: HPET 18DF len=56
2:206 0:000 - [02]: APIC 18DF len=188
2:206 0:000 - [03]: MCFG 18DF len=60
2:206 0:000 - [04]: TCPA 18DF len=50
2:206 0:000 - [05]: SSDT SataAhci len=714
2:206 0:000 - [06]: SSDT PtidDevc len=1162
2:206 0:000 - [07]: FPDT 18DF len=68
2:206 0:000 - [08]: BGRT 18DF len=56
2:206 0:000 - [09]: SSDT Cpu0Ist len=2486
2:206 0:000 - [10]: SSDT CpuPm len=2878
2:206 0:000 - [11]: ASF! 18DF len=165
2:206 0:000 Calibrated TSC Frequency = 2594107166 = 2594MHz
2:207 0:000 === [ GetUserSettings ] ===================================
2:207 0:000 Add 1 devices:
2:207 0:000 USB FixOwnership: yes
2:207 0:000 Dropping 2 tables:
2:207 0:000 - [00]: Drop table signature="DMAR" (52414D44)
2:207 0:000 - set table: 52414D44, 0 to drop: no
2:207 0:000 - [01]: Drop table signature="SSDT" (54445353) table-id="PtidDevc" (6376654464697450)
2:207 0:000 - set table: 54445353, 6376654464697450 to drop: yes
2:207 0:000 - final DSDT Fix mask=00060050
2:207 0:000 PatchesDSDT: 34 requested
2:207 0:000 - [00]: (change _DSM to XDSM) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
2:207 0:000 - [01]: (change _OSI to XOSI) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
2:207 0:000 - [02]: (change EC0 to EC) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
2:207 0:000 - [03]: (change EHC1 to EH01) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
2:207 0:000 - [04]: (change EHC2 to EH02) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
2:207 0:000 - [05]: (change GFX0 to IGPU) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
2:207 0:000 - [06]: (Change Device(HECI) _ADR=0x00160000 to _ADR=0) lenToFind: 14, lenToReplace: 14, Target Bridge: <null string>
2:207 0:000 patch disabled at config
2:207 0:000 - [07]: (change HDAS to HDEF) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
2:207 0:000 - [08]: (change B0D3 to HDAU) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
2:207 0:000 - [09]: (change Method(UPRW,2,S) to XPRW) lenToFind: 7, lenToReplace: 7, Target Bridge: <null string>
2:207 0:000 - [10]: (change Method(GPRW,2,N) to XPRW) lenToFind: 5, lenToReplace: 5, Target Bridge: <null string>
2:207 0:000 - [11]: (change LANC Method(_PRW,0,Serialized) to Method(XPRW,0,..)) lenToFind: 11, lenToReplace: 11, Target Bridge: <null string>
2:207 0:000 - [12]: (change _PTS to ZPTS) lenToFind: 5, lenToReplace: 5, Target Bridge: <null string>
2:207 0:000 - [13]: (change _WAK to ZWAK) lenToFind: 5, lenToReplace: 5, Target Bridge: <null string>
2:207 0:000 - [14]: (change _WAK to ZWAK (G3)) lenToFind: 5, lenToReplace: 5, Target Bridge: <null string>
2:207 0:000 - [15]: (change Method(BTIF,1,Serialized) to BTI0) lenToFind: 7, lenToReplace: 7, Target Bridge: <null string>
2:207 0:000 - [16]: (change Method(BTIF,1,Serialized) to BTI0 (G3)) lenToFind: 8, lenToReplace: 8, Target Bridge: <null string>
2:207 0:000 - [17]: (change Method(BTST,2,Serialized) to BTS1) lenToFind: 7, lenToReplace: 7, Target Bridge: <null string>
2:207 0:000 - [18]: (change Method(BTST,2,Serialized) to BTS1 (G3)) lenToFind: 8, lenToReplace: 8, Target Bridge: <null string>
2:207 0:000 - [19]: (change Method(SBTC,3,NotSerialized) to SBT2) lenToFind: 7, lenToReplace: 7, Target Bridge: <null string>
2:207 0:000 - [20]: (change Method(GBTI,1,NotSerialized) to GBT3) lenToFind: 7, lenToReplace: 7, Target Bridge: <null string>
2:207 0:000 - [21]: (change Method(GBTC,0,NotSerialized) to GBT4) lenToFind: 7, lenToReplace: 7, Target Bridge: <null string>
2:207 0:000 - [22]: (change Method(ITLB,0,NotSerialized) to ITL1 (for G4)) lenToFind: 5, lenToReplace: 5, Target Bridge: <null string>
2:207 0:000 - [23]: (change Method(GACW,0,NotSerialized) to XACW (for G4 latest BIOS)) lenToFind: 5, lenToReplace: 5, Target Bridge: <null string>
2:207 0:000 - [24]: (change Method(GBAW,0,NotSerialized) to XBAW (for G4 latest BIOS)) lenToFind: 5, lenToReplace: 5, Target Bridge: <null string>
2:207 0:000 - [25]: (change Name(NBTI,..) to NBT5) lenToFind: 5, lenToReplace: 5, Target Bridge: <null string>
2:207 0:000 - [26]: (change Notify(\_SB.BAT0,...) to Notify(_SB.BATC,...)) lenToFind: 11, lenToReplace: 11, Target Bridge: <null string>
2:207 0:000 - [27]: (change Notify(\_SB.BAT1,...) to Notify(_SB.BATC,...)) lenToFind: 11, lenToReplace: 11, Target Bridge: <null string>
2:207 0:000 - [28]: (change Notify(BAT0,...) to Notify(BATC,...)) lenToFind: 5, lenToReplace: 5, Target Bridge: <null string>
2:207 0:000 - [29]: (change Notify(BAT1,...) to Notify(BATC,...)) lenToFind: 5, lenToReplace: 5, Target Bridge: <null string>
2:207 0:000 - [30]: (change Method(RDSS,1,S) to XDSS) lenToFind: 5, lenToReplace: 5, Target Bridge: <null string>
2:207 0:000 - [31]: (change EC Method(_REG,2,N) to XREG, 4x40s, 4x30s) lenToFind: 11, lenToReplace: 11, Target Bridge: <null string>
2:207 0:000 - [32]: (change EC Method(_REG,2,N) to XREG, 4x0 G3 Skylake) lenToFind: 11, lenToReplace: 11, Target Bridge: <null string>
2:207 0:000 - [33]: (RTC fix) lenToFind: 8, lenToReplace: 8, Target Bridge: <null string>
2:207 0:000 Using ProductName from config: MacBookPro9,2
2:207 0:000 BiosVersion: not set, Using BiosVersion from clover
2:207 0:000 BiosVersion: MBP91.88Z.F000.B00.1907241129
2:207 0:000 BiosReleaseDate: 07/24/2019
2:207 0:000 Using EfiVersion from clover: 229.0.0.0.0
2:207 0:000 Using FirmwareFeatures from clover: 0xC00DE137
2:207 0:000 Using FirmwareFeaturesMask from clover: 0xFF1FFF3F
2:207 0:000 PlatformFeature will not set in SMBIOS
2:208 0:000 === [ Found DSDT tables ] =================================
3:335 1:126 === [ ScanVolumes ] =======================================
3:335 0:000 Found 6 volumes with blockIO
3:335 0:000 - [00]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)
3:335 0:000 - [01]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,FE28E2A8-8B1A-45A1-A729-910769780ABE,0x28,0x64000)
3:335 0:000 Result of bootcode detection: bootable unknown (legacy)
3:335 0:000 This is SelfVolume !!
3:335 0:000 - [02]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,E93FD886-34A6-4462-8906-516C0EDDC82B,0x64028,0x1BD8A540)
3:336 0:000 - [03]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,BA52045F-BB64-4C99-B92D-24DEAA5D3A5D,0x1BDEE568,0x135F20)
3:336 0:000 - [04]: Volume: PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x2,0x0)
3:347 0:011 USB volume
3:347 0:000 USB volume
3:347 0:000 - [05]: Volume: PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x2,0x0)\HD(1,MBR,0x00000000,0x20,0x1CA3D72)
3:359 0:011 Result of bootcode detection: bootable unknown (legacy)
3:359 0:000 USB volume
3:359 0:000 USB volume
3:362 0:003 Loading nvram.plist from Vol 'EFI' - loaded, size=805
3:369 0:006 === [ PutNvramPlistToRtVars ] =============================
3:369 0:000 Adding Key: EFILoginHiDPI: Size = 4, Data: 00 00 00 00
3:369 0:000 Adding Key: SystemAudioVolume: Size = 1, Data: 17
3:369 0:000 Adding Key: SystemAudioVolumeDB: Size = 1, Data: F4
3:369 0:000 Adding Key: backlight-level: Size = 2, Data: 10 07
3:369 0:000 Adding Key: bluetoothActiveControllerInfo: Size = 16, Data: 05 30 F3 0C 00 00 00 00 16 1D B4 74 9F CF 3B AB
3:369 0:000 Adding Key: csr-active-config: Size = 4, Data: 67 00 00 00
3:369 0:000 Adding Key: flagstate: Size = 32, Data: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3:369 0:000 Adding Key: fmm-computer-name: Size = 21, Data: 65 6C 69 74 65 62 6F 6F 6B 20 4D 61 63 42 6F 6F 6B 20 50 72 6F
3:369 0:000 Adding Key: prev-lang:kbd: Size = 4, Data: 65 6E 3A 30
3:369 0:000 Adding Key: security-mode: String: Size = 4, Val = 'none'
3:369 0:000 No AudioIoProtocols, status=Not Found
3:369 0:000 === [ InitTheme ] =========================================
3:369 0:000 use daylight theme
3:369 0:000 GlobalConfig: BGM not found, get embedded theme
3:369 0:000 using embedded theme
3:369 0:000 got embedded sound
3:369 0:000 Channels: 2 Sample rate: 8000 Hz Bits: 16
3:369 0:000 output to channel 0 with volume 70, len=25600
3:369 0:000 sound channels=2 bits=16 freq=8000
3:370 0:000 sound converted to 48kHz
3:370 0:000 not found AudioIo to play
3:370 0:000 sound play end with status=Not Found
3:371 0:001 Using embedded font: Success
3:371 0:000 theme inited
3:371 0:000 Chosen embedded theme
3:371 0:000 after NVRAM boot-args=kext-dev-mode=1 -igfxnohdmi dart=0
3:371 0:000 === [ Dump SMC keys from NVRAM ] ==========================
3:371 0:000 no AppleSMC protocol
3:371 0:000 === [ AddCustomEntries ] ==================================
3:371 0:000 Custom entry 0 skipped because it is hidden.
3:371 0:000 Custom entry 1 Title:"Windows" Path:"\EFI\Microsoft\Boot\bootmgfw.efi" Options:"-s -h" Type:7 Flags:0x0 matching all volumes
3:371 0:000 Checking volume "EFI" (PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,FE28E2A8-8B1A-45A1-A729-910769780ABE,0x28,0x64000)) ... skipped because path does not exist
3:371 0:000 Checking volume "HD" (PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,E93FD886-34A6-4462-8906-516C0EDDC82B,0x64028,0x1BD8A540)) ... skipped because path does not exist
3:371 0:000 Checking volume "Recovery HD" (PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,BA52045F-BB64-4C99-B92D-24DEAA5D3A5D,0x1BDEE568,0x135F20)) ... skipped because path does not exist
3:371 0:000 === [ ScanLoader ] ========================================
3:371 0:000 - [01]: 'EFI'
3:372 0:000 - [02]: 'HD'
3:386 0:014 AddLoaderEntry for Volume Name=HD
3:387 0:000 Not match custom entry 0: Type: not match
3:394 0:007 hibernated: set as never
3:396 0:001 - [03]: 'Recovery HD'
3:396 0:000 AddLoaderEntry for Volume Name=Recovery HD
3:396 0:000 Skipped because matching custom entry 0!
3:396 0:000 === [ AddCustomTool ] =====================================
3:397 0:000 found tool \EFI\CLOVER\tools\Shell64U.efi
3:397 0:000 Checking EFI partition Volume 1 for Clover
3:397 0:000 Found Clover
3:398 0:001 === [ GetEfiBootDeviceFromNvram ] =========================
3:398 0:000 - found entry 0. 'Boot macOS from HD', Volume 'HD', DevicePath 'PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,E93FD886-34A6-4462-8906-516C0EDDC82B,0x64028,0x1BD8A540)\System\Library\CoreServices\boot.efii'
3:398 0:000 DefaultIndex=0 and MainMenu.EntryCount=7
3:548 0:149 GUI ready
5:607 2:059 exit from MainMenu 4
5:607 0:000 === [ StartLoader ] =======================================
5:607 0:000 Finally: ExternalClock=25MHz BusSpeed=99774kHz CPUFreq=2594MHz PIS: hw.busfrequency=100000000Hz
5:607 0:000 Loading boot.efi status=Success
5:756 0:148 GetOSVersion: 10.13.6 (17G9016)
5:756 0:000 CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM
5:756 0:000 Filtering KextPatches:
5:756 0:000 - [00]: com.apple.iokit.IOAHCIBlockStorage (Enable TRIM for non-Apple SSDs) :: BinPatch :: [OS: 10.13.6 | MatchOS: All | MatchBuild: All] ==> allowed
5:756 0:000 Filtering KernelPatches:
5:756 0:000 - [00]: MSR 0xE2 _xcpm_idle instant reboot(c) Pike R. Alpha :: [OS: 10.13.6 | MatchOS: All | MatchBuild: no] ==> allowed by OS
5:756 0:000 - [01]: Disable panic kext logging on 10.13 release kernel (credit vit9696) :: [OS: 10.13.6 | MatchOS: 10.13.x | MatchBuild: no] ==> allowed by OS
5:756 0:000 - [02]: Disable panic kext logging on 10.14 release kernel (credit vit9696) :: [OS: 10.13.6 | MatchOS: 10.14.x | MatchBuild: no] ==> disabled by user
5:756 0:000 Will not patch boot.efi
5:756 0:000 === [ PatchSmbios ] =======================================
5:756 0:000 insert table 9 for dev 0:0
5:756 0:000 Table 11 present, but rewritten for us
5:757 0:000 Trusting SMBIOS...
5:757 0:000 Detected alternating SMBIOS channel banks
5:757 0:000 Channels: 2
5:757 0:000 Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
5:757 0:000 partNum=AM1L16BC4R1-B1GS
5:757 0:000 SMBIOS Type 17 Index = 0 => 0 0:
5:757 0:000 BANK 0 DIMM0 1600MHz 4096MB
5:757 0:000 partNum=AM1L16BC4R1-B1GS
5:757 0:000 SMBIOS Type 17 Index = 1 => 1 2:
5:757 0:000 BANK 1 DIMM0 1600MHz 4096MB
5:757 0:000 mTotalSystemMemory = 8192
5:757 0:000 NumberOfMemoryDevices = 2
5:757 0:000 Type20[0]->End = 0x3FFFFF, Type17[0] = 0x1000
5:757 0:000 Type20[1]->End = 0x7FFFFF, Type17[1] = 0x3000
5:757 0:000 === [ PatchACPI ] =========================================
5:757 0:000 Xsdt reallocation done
5:757 0:000 old FADT length=10C
5:757 0:000 SignatureFixup: 0x43463732 -> 0x0
5:757 0:000 Apply DsdtFixMask=0x00060050
5:757 0:000 drop _DSM mask=0x0000
5:757 0:000 === [ FixBiosDsdt ] =======================================
5:758 0:000 Patching DSDT:
5:758 0:000 - [change _DSM to XDSM]: pattern 5F44534D, patched at: [ (4C2A) (5173) ]
5:758 0:000 - [change _OSI to XOSI]: pattern 5F4F5349, patched at: [ (A35) (4) (12) (19) (1D) (1D) (1B) (19) (19) (19) (123C) (C6F) (4) (18) (1C) (1C) (18) (18) (18) (44B6) (59) (4C80) (38) (38) (38) ]
5:758 0:000 - [change EC0 to EC]: pattern 4543305F, patched at: [ (B1) (17) (16) (15) (20) (18) (16) (16) (A8) (13) (18) (15) (18) (16) (19) (15) (E7) (14) (18) (15) (1354) (2A1) (A9) (15) (17) (14) (16) (A2) (AE) (17) (22) (15) (15) (302) (15) (16) (16) (39) (15) (16) (16) (3EA7) (18) (1CF2) (174A) (4F) (2F4) (13) (1F) (13) (56) (175) (3159) (28) (329) (71) (7E) (25) (60B) (220) (6F) (41) (82) (73) (6B) (1B) (49) (70) (7D) (25) (D380) (797) (16) (AC) (53) (1F) (14A) (14) (1A) (14) (1A) (14) (17) (14) (17) (14) (2A) (14) (17) (14) (17) (14) (38) (14) (26) (14) (26) (47) (21) (3D) (15) (39DB) (B1) (27) (23) (37B) (5E) (2EC) (15) (27) (1F) (25) (1F) (2B) (15) (7B) (15) (22) (16) (18) (15) (A4) (15) (1E) (14) (2A) (14) (1F) (201) (5C) (37) (14) (18) (18) (1A) (14) (18) (18) (BE) (14) (18) (18) (1A) (14) (18) (18) (116) (FB) (16) (BB) (1B) (2746) ]
5:759 0:000 - [change EHC1 to EH01]: pattern 45484331, patched at: [ (156D) (12) (10) (56F6) (4D33) (176D8) ]
5:759 0:000 - [change EHC2 to EH02]: pattern 45484332, patched at: [ (15AA) (12) (10) (142) (56FF) (1C295) ]
5:759 0:000 - [change GFX0 to IGPU]: pattern 47465830, patched at: [ (356) (35B2) (570) (11) (21) (ADD) (1D) (2DF) (3FB) (49) (11B) (15D) (14) (14) (2B) (44) (22) (2E) (86) (1C) (29) (2D) (2A) (34) (24) (F) (2D) (43) (1A) (24) (1E) (19) (23) (1E) (36) (27) (C10) ]
5:760 0:000 - [Change Device(HECI) _ADR=0x00160000 to _ADR=0]: disabled
5:760 0:000 - [change HDAS to HDEF]: pattern 48444153, bin not found / already patched!
5:760 0:000 - [change B0D3 to HDAU]: pattern 42304433, bin not found / already patched!
5:760 0:000 - [change Method(UPRW,2,S) to XPRW]: pattern 55505257, patched at: [ (2ABC) ]
5:761 0:000 - [change Method(GPRW,2,N) to XPRW]: pattern 47505257, bin not found / already patched!
5:761 0:000 - [change LANC Method(_PRW,0,Serialized) to Method(XPRW,0,..)]: pattern 00001900, patched at: [ (6C29) ]
5:761 0:000 - [change _PTS to ZPTS]: pattern 5F505453, patched at: [ (64F) ]
5:762 0:000 - [change _WAK to ZWAK]: pattern 5F57414B, patched at: [ (6BC) ]
5:762 0:000 - [change _WAK to ZWAK (G3)]: pattern 5F57414B, bin not found / already patched!
5:762 0:000 - [change Method(BTIF,1,Serialized) to BTI0]: pattern 42544946, patched at: [ (8689) ]
5:763 0:000 - [change Method(BTIF,1,Serialized) to BTI0 (G3)]: pattern 42544946, bin not found / already patched!
5:763 0:000 - [change Method(BTST,2,Serialized) to BTS1]: pattern 42545354, patched at: [ (879C) ]
5:763 0:000 - [change Method(BTST,2,Serialized) to BTS1 (G3)]: pattern 42545354, bin not found / already patched!
5:764 0:000 - [change Method(SBTC,3,NotSerialized) to SBT2]: pattern 53425443, patched at: [ (9013) ]
5:764 0:000 - [change Method(GBTI,1,NotSerialized) to GBT3]: pattern 47425449, patched at: [ (8937) ]
5:764 0:000 - [change Method(GBTC,0,NotSerialized) to GBT4]: pattern 47425443, patched at: [ (8DD2) ]
5:765 0:000 - [change Method(ITLB,0,NotSerialized) to ITL1 (for G4)]: pattern 49544C42, patched at: [ (8905) ]
5:765 0:000 - [change Method(GACW,0,NotSerialized) to XACW (for G4 latest BIOS)]: pattern 47414357, bin not found / already patched!
5:765 0:000 - [change Method(GBAW,0,NotSerialized) to XBAW (for G4 latest BIOS)]: pattern 47424157, bin not found / already patched!
5:766 0:000 - [change Name(NBTI,..) to NBT5]: pattern 084E4254, patched at: [ (D653) ]
5:766 0:000 - [change Notify(\_SB.BAT0,...) to Notify(_SB.BATC,...)]: pattern 865C2E5F, patched at: [ (9490) (71) (64) (200) ]
5:766 0:000 - [change Notify(\_SB.BAT1,...) to Notify(_SB.BATC,...)]: pattern 865C2E5F, patched at: [ (947B) (10A) (19) (1DA) ]
5:767 0:000 - [change Notify(BAT0,...) to Notify(BATC,...)]: pattern 86424154, bin not found / already patched!
5:767 0:000 - [change Notify(BAT1,...) to Notify(BATC,...)]: pattern 86424154, bin not found / already patched!
5:767 0:000 - [change Method(RDSS,1,S) to XDSS]: pattern 52445353, bin not found / already patched!
5:767 0:000 - [change EC Method(_REG,2,N) to XREG, 4x40s, 4x30s]: pattern 5F524547, patched at: [ (7D0A) ]
5:768 0:000 - [change EC Method(_REG,2,N) to XREG, 4x0 G3 Skylake]: pattern 5F524547, bin not found / already patched!
5:768 0:000 - [RTC fix]: pattern 47017000, patched at: [ (A440) ]
5:768 0:000 0 replacements
5:770 0:001 found RTC Length not match, Maybe will cause CMOS reset, will patch it.
5:770 0:000 found RTC had IRQNoFlag will move -3 bytes
5:771 0:001 found PIC had IRQNoFlag will move -3 bytes
5:771 0:000 Start HPET Fix
5:773 0:001 PreCleanup XSDT: count=12, length=132
5:773 0:000 PreCleanup XSDT, corrected XSDT: count=12, length=132
5:773 0:000 === [ ACPIDropTables ] ====================================
5:773 0:000 Drop tables from XSDT, SIGN=SSDT TableID=PtidDevc Length=1162
5:773 0:000 Table[6]: SSDT PtidDevc 1162 dropped
5:773 0:000 Patching SSDT SataAhci Length=714
5:773 0:000 0. [change _DSM to XDSM]: pattern 5F44534D, patched at: [ (9D) (55) ]
5:773 0:000 1. [change _OSI to XOSI]: pattern 5F4F5349, bin not found / already patched!
5:773 0:000 2. [change EC0 to EC]: pattern 4543305F, bin not found / already patched!
5:773 0:000 3. [change EHC1 to EH01]: pattern 45484331, bin not found / already patched!
5:773 0:000 4. [change EHC2 to EH02]: pattern 45484332, bin not found / already patched!
5:773 0:000 5. [change GFX0 to IGPU]: pattern 47465830, bin not found / already patched!
5:773 0:000 6. [Change Device(HECI) _ADR=0x00160000 to _ADR=0]: disabled
5:773 0:000 7. [change HDAS to HDEF]: pattern 48444153, bin not found / already patched!
5:773 0:000 8. [change B0D3 to HDAU]: pattern 42304433, bin not found / already patched!
5:773 0:000 9. [change Method(UPRW,2,S) to XPRW]: pattern 55505257, bin not found / already patched!
5:773 0:000 10. [change Method(GPRW,2,N) to XPRW]: pattern 47505257, bin not found / already patched!
5:773 0:000 11. [change LANC Method(_PRW,0,Serialized) to Method(XPRW,0,..)]: pattern 00001900, bin not found / already patched!
5:773 0:000 12. [change _PTS to ZPTS]: pattern 5F505453, bin not found / already patched!
5:773 0:000 13. [change _WAK to ZWAK]: pattern 5F57414B, bin not found / already patched!
5:773 0:000 14. [change _WAK to ZWAK (G3)]: pattern 5F57414B, bin not found / already patched!
5:773 0:000 15. [change Method(BTIF,1,Serialized) to BTI0]: pattern 42544946, bin not found / already patched!
5:773 0:000 16. [change Method(BTIF,1,Serialized) to BTI0 (G3)]: pattern 42544946, bin not found / already patched!
5:773 0:000 17. [change Method(BTST,2,Serialized) to BTS1]: pattern 42545354, bin not found / already patched!
5:773 0:000 18. [change Method(BTST,2,Serialized) to BTS1 (G3)]: pattern 42545354, bin not found / already patched!
5:773 0:000 19. [change Method(SBTC,3,NotSerialized) to SBT2]: pattern 53425443, bin not found / already patched!
5:773 0:000 20. [change Method(GBTI,1,NotSerialized) to GBT3]: pattern 47425449, bin not found / already patched!
5:773 0:000 21. [change Method(GBTC,0,NotSerialized) to GBT4]: pattern 47425443, bin not found / already patched!
5:773 0:000 22. [change Method(ITLB,0,NotSerialized) to ITL1 (for G4)]: pattern 49544C42, bin not found / already patched!
5:773 0:000 23. [change Method(GACW,0,NotSerialized) to XACW (for G4 latest BIOS)]: pattern 47414357, bin not found / already patched!
5:773 0:000 24. [change Method(GBAW,0,NotSerialized) to XBAW (for G4 latest BIOS)]: pattern 47424157, bin not found / already patched!
5:773 0:000 25. [change Name(NBTI,..) to NBT5]: pattern 084E4254, bin not found / already patched!
5:773 0:000 26. [change Notify(\_SB.BAT0,...) to Notify(_SB.BATC,...)]: pattern 865C2E5F, bin not found / already patched!
5:773 0:000 27. [change Notify(\_SB.BAT1,...) to Notify(_SB.BATC,...)]: pattern 865C2E5F, bin not found / already patched!
5:773 0:000 28. [change Notify(BAT0,...) to Notify(BATC,...)]: pattern 86424154, bin not found / already patched!
5:773 0:000 29. [change Notify(BAT1,...) to Notify(BATC,...)]: pattern 86424154, bin not found / already patched!
5:773 0:000 30. [change Method(RDSS,1,S) to XDSS]: pattern 52445353, bin not found / already patched!
5:773 0:000 31. [change EC Method(_REG,2,N) to XREG, 4x40s, 4x30s]: pattern 5F524547, bin not found / already patched!
5:773 0:000 32. [change EC Method(_REG,2,N) to XREG, 4x0 G3 Skylake]: pattern 5F524547, bin not found / already patched!
5:773 0:000 33. [RTC fix]: pattern 47017000, bin not found / already patched!
5:773 0:000 0 replacements
5:773 0:000 Patching SSDT Cpu0Ist Length=2486
5:773 0:000 0. [change _DSM to XDSM]: pattern 5F44534D, bin not found / already patched!
5:773 0:000 1. [change _OSI to XOSI]: pattern 5F4F5349, bin not found / already patched!
5:773 0:000 2. [change EC0 to EC]: pattern 4543305F, bin not found / already patched!
5:773 0:000 3. [change EHC1 to EH01]: pattern 45484331, bin not found / already patched!
5:773 0:000 4. [change EHC2 to EH02]: pattern 45484332, bin not found / already patched!
5:773 0:000 5. [change GFX0 to IGPU]: pattern 47465830, bin not found / already patched!
5:773 0:000 6. [Change Device(HECI) _ADR=0x00160000 to _ADR=0]: disabled
5:773 0:000 7. [change HDAS to HDEF]: pattern 48444153, bin not found / already patched!
5:773 0:000 8. [change B0D3 to HDAU]: pattern 42304433, bin not found / already patched!
5:773 0:000 9. [change Method(UPRW,2,S) to XPRW]: pattern 55505257, bin not found / already patched!
5:773 0:000 10. [change Method(GPRW,2,N) to XPRW]: pattern 47505257, bin not found / already patched!
5:773 0:000 11. [change LANC Method(_PRW,0,Serialized) to Method(XPRW,0,..)]: pattern 00001900, bin not found / already patched!
5:773 0:000 12. [change _PTS to ZPTS]: pattern 5F505453, bin not found / already patched!
5:773 0:000 13. [change _WAK to ZWAK]: pattern 5F57414B, bin not found / already patched!
5:773 0:000 14. [change _WAK to ZWAK (G3)]: pattern 5F57414B, bin not found / already patched!
5:773 0:000 15. [change Method(BTIF,1,Serialized) to BTI0]: pattern 42544946, bin not found / already patched!
5:773 0:000 16. [change Method(BTIF,1,Serialized) to BTI0 (G3)]: pattern 42544946, bin not found / already patched!
5:773 0:000 17. [change Method(BTST,2,Serialized) to BTS1]: pattern 42545354, bin not found / already patched!
5:773 0:000 18. [change Method(BTST,2,Serialized) to BTS1 (G3)]: pattern 42545354, bin not found / already patched!
5:773 0:000 19. [change Method(SBTC,3,NotSerialized) to SBT2]: pattern 53425443, bin not found / already patched!
5:773 0:000 20. [change Method(GBTI,1,NotSerialized) to GBT3]: pattern 47425449, bin not found / already patched!
5:773 0:000 21. [change Method(GBTC,0,NotSerialized) to GBT4]: pattern 47425443, bin not found / already patched!
5:773 0:000 22. [change Method(ITLB,0,NotSerialized) to ITL1 (for G4)]: pattern 49544C42, bin not found / already patched!
5:773 0:000 23. [change Method(GACW,0,NotSerialized) to XACW (for G4 latest BIOS)]: pattern 47414357, bin not found / already patched!
5:773 0:000 24. [change Method(GBAW,0,NotSerialized) to XBAW (for G4 latest BIOS)]: pattern 47424157, bin not found / already patched!
5:773 0:000 25. [change Name(NBTI,..) to NBT5]: pattern 084E4254, bin not found / already patched!
5:773 0:000 26. [change Notify(\_SB.BAT0,...) to Notify(_SB.BATC,...)]: pattern 865C2E5F, bin not found / already patched!
5:773 0:000 27. [change Notify(\_SB.BAT1,...) to Notify(_SB.BATC,...)]: pattern 865C2E5F, bin not found / already patched!
5:773 0:000 28. [change Notify(BAT0,...) to Notify(BATC,...)]: pattern 86424154, bin not found / already patched!
5:773 0:000 29. [change Notify(BAT1,...) to Notify(BATC,...)]: pattern 86424154, bin not found / already patched!
5:773 0:000 30. [change Method(RDSS,1,S) to XDSS]: pattern 52445353, bin not found / already patched!
5:773 0:000 31. [change EC Method(_REG,2,N) to XREG, 4x40s, 4x30s]: pattern 5F524547, bin not found / already patched!
5:773 0:000 32. [change EC Method(_REG,2,N) to XREG, 4x0 G3 Skylake]: pattern 5F524547, bin not found / already patched!
5:773 0:000 33. [RTC fix]: pattern 47017000, bin not found / already patched!
5:773 0:000 0 replacements
5:773 0:000 Patching SSDT CpuPm Length=2878
5:773 0:000 0. [change _DSM to XDSM]: pattern 5F44534D, bin not found / already patched!
5:774 0:000 1. [change _OSI to XOSI]: pattern 5F4F5349, bin not found / already patched!
5:774 0:000 2. [change EC0 to EC]: pattern 4543305F, bin not found / already patched!
5:774 0:000 3. [change EHC1 to EH01]: pattern 45484331, bin not found / already patched!
5:774 0:000 4. [change EHC2 to EH02]: pattern 45484332, bin not found / already patched!
5:774 0:000 5. [change GFX0 to IGPU]: pattern 47465830, bin not found / already patched!
5:774 0:000 6. [Change Device(HECI) _ADR=0x00160000 to _ADR=0]: disabled
5:774 0:000 7. [change HDAS to HDEF]: pattern 48444153, bin not found / already patched!
5:774 0:000 8. [change B0D3 to HDAU]: pattern 42304433, bin not found / already patched!
5:774 0:000 9. [change Method(UPRW,2,S) to XPRW]: pattern 55505257, bin not found / already patched!
5:774 0:000 10. [change Method(GPRW,2,N) to XPRW]: pattern 47505257, bin not found / already patched!
5:774 0:000 11. [change LANC Method(_PRW,0,Serialized) to Method(XPRW,0,..)]: pattern 00001900, bin not found / already patched!
5:774 0:000 12. [change _PTS to ZPTS]: pattern 5F505453, bin not found / already patched!
5:774 0:000 13. [change _WAK to ZWAK]: pattern 5F57414B, bin not found / already patched!
5:774 0:000 14. [change _WAK to ZWAK (G3)]: pattern 5F57414B, bin not found / already patched!
5:774 0:000 15. [change Method(BTIF,1,Serialized) to BTI0]: pattern 42544946, bin not found / already patched!
5:774 0:000 16. [change Method(BTIF,1,Serialized) to BTI0 (G3)]: pattern 42544946, bin not found / already patched!
5:774 0:000 17. [change Method(BTST,2,Serialized) to BTS1]: pattern 42545354, bin not found / already patched!
5:774 0:000 18. [change Method(BTST,2,Serialized) to BTS1 (G3)]: pattern 42545354, bin not found / already patched!
5:774 0:000 19. [change Method(SBTC,3,NotSerialized) to SBT2]: pattern 53425443, bin not found / already patched!
5:774 0:000 20. [change Method(GBTI,1,NotSerialized) to GBT3]: pattern 47425449, bin not found / already patched!
5:774 0:000 21. [change Method(GBTC,0,NotSerialized) to GBT4]: pattern 47425443, bin not found / already patched!
5:774 0:000 22. [change Method(ITLB,0,NotSerialized) to ITL1 (for G4)]: pattern 49544C42, bin not found / already patched!
5:774 0:000 23. [change Method(GACW,0,NotSerialized) to XACW (for G4 latest BIOS)]: pattern 47414357, bin not found / already patched!
5:774 0:000 24. [change Method(GBAW,0,NotSerialized) to XBAW (for G4 latest BIOS)]: pattern 47424157, bin not found / already patched!
5:774 0:000 25. [change Name(NBTI,..) to NBT5]: pattern 084E4254, bin not found / already patched!
5:774 0:000 26. [change Notify(\_SB.BAT0,...) to Notify(_SB.BATC,...)]: pattern 865C2E5F, bin not found / already patched!
5:774 0:000 27. [change Notify(\_SB.BAT1,...) to Notify(_SB.BATC,...)]: pattern 865C2E5F, bin not found / already patched!
5:774 0:000 28. [change Notify(BAT0,...) to Notify(BATC,...)]: pattern 86424154, bin not found / already patched!
5:774 0:000 29. [change Notify(BAT1,...) to Notify(BATC,...)]: pattern 86424154, bin not found / already patched!
5:774 0:000 30. [change Method(RDSS,1,S) to XDSS]: pattern 52445353, bin not found / already patched!
5:774 0:000 31. [change EC Method(_REG,2,N) to XREG, 4x40s, 4x30s]: pattern 5F524547, bin not found / already patched!
5:774 0:000 32. [change EC Method(_REG,2,N) to XREG, 4x0 G3 Skylake]: pattern 5F524547, bin not found / already patched!
5:774 0:000 33. [RTC fix]: pattern 47017000, bin not found / already patched!
5:774 0:000 0 replacements
5:774 0:000 Found OperationRegion(PPMT, SystemMemory, B9F78F98, ...)
5:774 0:000 === [ ACPIPatchedAML ] ====================================
5:774 0:000 Unsorted
5:774 0:000 Inserting SSDT.aml from EFI\CLOVER\ACPI\patched: size=1640 ... Success
5:774 0:000 Inserting SSDT-PNLF.aml from EFI\CLOVER\ACPI\patched: size=1128 ... Success
5:774 0:000 Inserting SSDT-IGPUH.aml from EFI\CLOVER\ACPI\patched: size=3428 ... Success
5:774 0:000 Inserting SSDT-FANQ.aml from EFI\CLOVER\ACPI\patched: size=1268 ... Success
5:774 0:000 Inserting SSDT-9x70.aml from EFI\CLOVER\ACPI\patched: size=9813 ... Success
5:774 0:000 ApicCPUNum=4
5:774 0:000 Cleanup XSDT: count=17, length=172
5:774 0:000 corrected XSDT count=16, length=164
5:774 0:000 === [ RestSetup macOS ] ===================================
5:774 0:000 EdidDiscovered size=128
5:774 0:000 --- Discovered EDID Table size:128
5:774 0:000 000 | 00 FF FF FF FF FF FF 00 0D AE
5:774 0:000 010 | 84 14 00 00 00 00 26 16 01 04
5:774 0:000 020 | 90 1F 11 78 02 C6 75 97 58 53
5:774 0:000 030 | 8F 27 24 50 54 00 00 00 01 01
5:774 0:000 040 | 01 01 01 01 01 01 01 01 01 01
5:774 0:000 050 | 01 01 01 01 FC 2B 40 6E 61 84
5:774 0:000 060 | 36 30 30 20 35 00 36 AE 10 00
5:774 0:000 070 | 00 1A 52 1D 40 6E 61 84 36 30
5:774 0:000 080 | 30 20 35 00 36 AE 10 00 00 1A
5:774 0:000 090 | 00 00 00 00 00 00 00 00 00 00
5:774 0:000 100 | 00 00 00 00 00 00 00 00 00 00
5:774 0:000 110 | 00 02 00 0C 3D FF 0D 3C 7D 15
5:774 0:000 120 | 13 28 7D 00 00 00 00 A2
5:774 0:000 add device: PciRoot(0x0)/Pci(0x2,0x0)
5:774 0:000 Add key=model valuelen=49
5:774 0:000 Add key=hda-gfx valuelen=10
5:774 0:000 Add key=framebuffer-unifiedmem valuelen=4
5:774 0:000 Add key=framebuffer-patch0-replace valuelen=8
5:774 0:000 Add key=framebuffer-patch0-framebufferid valuelen=4
5:774 0:000 Add key=framebuffer-patch0-find valuelen=8
5:774 0:000 Add key=framebuffer-patch0-enable valuelen=1
5:774 0:000 Add key=framebuffer-patch-enable valuelen=4
5:774 0:000 Add key=framebuffer-con1-enable valuelen=1
5:774 0:000 Add key=framebuffer-con1-01660004-alldata valuelen=41
5:774 0:000 Add key=device_type valuelen=26
5:774 0:000 Add key=AAPL,slot-name valuelen=15
5:774 0:000 Add key=AAPL,ig-platform-id valuelen=4
5:774 0:000 Intel HD Graphics 4000 [8086:0166] :: PcieRoot(0x0)\Pci(0x2,0x0)
5:774 0:000 FakeID Intel GFX = 0x01668086
5:774 0:000 ig-platform-id = 0x01660004
5:774 0:000 Intel GFX revision = 0x9
5:774 0:000 stringlength = 2380
5:775 0:000 CurrentMode: Width=1600 Height=900
5:775 0:000 Beginning FSInjection
5:775 0:000 - ERROR: gFSInjectProtocolGuid not found!
5:775 0:000 Use origin smbios table type 1 guid.
5:775 0:000 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
5:775 0:000 Extra kext: EFI\CLOVER\kexts\Other\XHCI-unsupported.kext (v.0.9.2)
5:782 0:006 Extra kext: EFI\CLOVER\kexts\Other\WhateverGreen.kext (v.1.3.5)
5:796 0:014 Extra kext: EFI\CLOVER\kexts\Other\VoodooPS2Controller.kext (v.1.9.2)
5:810 0:013 |-- PlugIn kext: EFI\CLOVER\kexts\Other\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Trackpad.kext (v.1.9.2)
5:827 0:017 |-- PlugIn kext: EFI\CLOVER\kexts\Other\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Mouse.kext (v.1.9.2)
5:838 0:011 |-- PlugIn kext: EFI\CLOVER\kexts\Other\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Keyboard.kext (v.1.9.2)
5:863 0:024 Extra kext: EFI\CLOVER\kexts\Other\USBInjectAll.kext (v.0.7.1)
6:351 0:488 Extra kext: EFI\CLOVER\kexts\Other\SATA-unsupported.kext (v.0.9.2)
6:361 0:010 Extra kext: EFI\CLOVER\kexts\Other\RealtekRTL8111.kext (v.2.2.1)
6:374 0:013 Extra kext: EFI\CLOVER\kexts\Other\ProBookAtheros.kext (v.1.0.3)
6:382 0:007 Extra kext: EFI\CLOVER\kexts\Other\Lilu.kext (v.1.4.0)
6:395 0:012 Extra kext: EFI\CLOVER\kexts\Other\IntelMausiEthernet.kext (v.2.5.0d0)
6:408 0:012 Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext (v.1800)
6:429 0:021 Extra kext: EFI\CLOVER\kexts\Other\FakePCIID_Intel_HDMI_Audio.kext (v.1.3.15)
6:444 0:014 Extra kext: EFI\CLOVER\kexts\Other\FakePCIID.kext (v.1.3.15)
6:454 0:009 Extra kext: EFI\CLOVER\kexts\Other\CodecCommander.kext (v.2.7.1)
6:490 0:036 Extra kext: EFI\CLOVER\kexts\Other\AppleALC.kext (v.1.4.4)
7:859 1:369 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Off
7:860 0:000 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.13
7:866 0:006 SetScreenResolution: 1600x900 - already set
7:866 0:000 Custom boot is disabled