ÇÖZÜLDÜ Ekran Bozulmaları

AppleIntelInfo.kext v3.0 Copyright © 2012-2017 Pike R. Alpha. All rights reserved.

Settings:
------------------------------------------
enableHWP............................... : 1
logMSRs................................. : 1
logIGPU................................. : 0
logIntelRegs............................ : 0
logCStates.............................. : 1
logIPGStyle............................. : 1
InitialTSC.............................. : 0x179e54fb81c (43 MHz)
MWAIT C-States.......................... : 286531872

Processor Brandstring................... : Intel(R) Core(TM) i5-9600K CPU @ 3.70GHz

Processor Signature..................... : 0x906ED
------------------------------------------
 - Family............................... : 6
 - Stepping............................. : 13
 - Model................................ : 0x9E (158)

Model Specific Registers (MSRs)
------------------------------------------

MSR_IA32_PLATFORM_ID..............(0x17) : 0x4000000000000
------------------------------------------
 - Processor Flags...................... : 1

MSR_CORE_THREAD_COUNT.............(0x35) : 0x60006
------------------------------------------
 - Core Count........................... : 6
 - Thread Count......................... : 6

MSR_PLATFORM_INFO.................(0xCE) : 0x8080838F1012500
------------------------------------------
 - Maximum Non-Turbo Ratio.............. : 0x25 (3700 MHz)
 - Ratio Limit for Turbo Mode........... : 1 (programmable)
 - TDP Limit for Turbo Mode............. : 1 (programmable)
 - Low Power Mode Support............... : 0 (LMP not supported)
 - Number of ConfigTDP Levels........... : 0 (only base TDP level available)
 - Maximum Efficiency Ratio............. : 8
 - Minimum Operating Ratio.............. : 8

MSR_PMG_CST_CONFIG_CONTROL........(0xE2) : 0x1E008000
------------------------------------------
 - I/O MWAIT Redirection Enable......... : 0 (not enabled)
 - CFG Lock............................. : 1 (MSR locked until next reset)
 - C3 State Auto Demotion............... : 1 (enabled)
 - C1 State Auto Demotion............... : 1 (enabled)
 - C3 State Undemotion.................. : 1 (enabled)
 - C1 State Undemotion.................. : 1 (enabled)
 - Package C-State Auto Demotion........ : 0 (disabled/unsupported)
 - Package C-State Undemotion........... : 0 (disabled/unsupported)

MSR_PMG_IO_CAPTURE_BASE...........(0xE4) : 0x51814
------------------------------------------
 - LVL_2 Base Address................... : 0x1814
 - C-state Range........................ : 5 (C-States not included, I/O MWAIT redirection not enabled)

IA32_MPERF........................(0xE7) : 0x2B70BF3368
IA32_APERF........................(0xE8) : 0x38E3ABD89F

MSR_FLEX_RATIO...................(0x194) : 0xE0000
------------------------------------------

MSR_IA32_PERF_STATUS.............(0x198) : 0x22A900002B00
------------------------------------------
 - Current Performance State Value...... : 0x2B00 (4300 MHz)

MSR_IA32_PERF_CONTROL............(0x199) : 0xA00
------------------------------------------
 - Target performance State Value....... : 0xA00 (1000 MHz)
 - Intel Dynamic Acceleration........... : 0 (IDA engaged)

IA32_CLOCK_MODULATION............(0x19A) : 0x0

IA32_THERM_INTERRUPT.............(0x19B) : 0x10
------------------------------------------
 - High-Temperature Interrupt Enable.... : 0 (disabled)
 - Low-Temperature Interrupt Enable..... : 0 (disabled)
 - PROCHOT# Interrupt Enable............ : 0 (disabled)
 - FORCEPR# Interrupt Enable............ : 0 (disabled)
 - Critical Temperature Interrupt Enable : 1 (enabled)
 - Threshold #1 Value................... : 0
 - Threshold #1 Interrupt Enable........ : 0 (disabled)
 - Threshold #2 Value................... : 0
 - Threshold #2 Interrupt Enable........ : 0 (disabled)
 - Power Limit Notification Enable...... : 0 (disabled)

IA32_THERM_STATUS................(0x19C) : 0x883E0800
------------------------------------------
 - Thermal Status....................... : 0
 - Thermal Log.......................... : 0
 - PROCHOT # or FORCEPR# event.......... : 0
 - PROCHOT # or FORCEPR# log............ : 0
 - Critical Temperature Status.......... : 0
 - Critical Temperature log............. : 0
 - Thermal Threshold #1 Status.......... : 0
 - Thermal Threshold #1 log............. : 0
 - Thermal Threshold #2 Status.......... : 0
 - Thermal Threshold #2 log............. : 0
 - Power Limitation Status.............. : 0
 - Power Limitation log................. : 1
 - Current Limit Status................. : 0
 - Current Limit log.................... : 0
 - Cross Domain Limit Status............ : 0
 - Cross Domain Limit log............... : 0
 - Digital Readout...................... : 62
 - Resolution in Degrees Celsius........ : 1
 - Reading Valid........................ : 1 (valid)

MSR_THERM2_CTL...................(0x19D) : 0x0

IA32_MISC_ENABLES................(0x1A0) : 0x850089
------------------------------------------
 - Fast-Strings......................... : 1 (enabled)
 - FOPCODE compatibility mode Enable.... : 0
 - Automatic Thermal Control Circuit.... : 1 (enabled)
 - Split-lock Disable................... : 0
 - Performance Monitoring............... : 1 (available)
 - Bus Lock On Cache Line Splits Disable : 0
 - Hardware prefetch Disable............ : 0
 - Processor Event Based Sampling....... : 0 (PEBS supported)
 - GV1/2 legacy Enable.................. : 0
 - Enhanced Intel SpeedStep Technology.. : 1 (enabled)
 - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
 - Adjacent sector prefetch Disable..... : 0
 - CFG Lock............................. : 0 (MSR not locked)
 - xTPR Message Disable................. : 1 (disabled)

MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x641000
------------------------------------------
 - Turbo Attenuation Units.............. : 0
 - Temperature Target................... : 100
 - TCC Activation Offset................ : 0

MSR_MISC_PWR_MGMT................(0x1AA) : 0x401CC1
------------------------------------------
 - EIST Hardware Coordination........... : 1 (hardware coordination disabled)
 - Energy/Performance Bias support...... : 1
 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
 - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)
 - SpeedShift Technology Enable......... : 1 (enabled)
 - SpeedShift Interrupt Coordination.... : 1 (enabled)
 - SpeedShift Energy Efficient Perf..... : 1 (enabled)
 - SpeedShift Technology Setup for HWP.. : Yes (setup for HWP)

MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x2B2B2B2C2C2D2D2E
------------------------------------------
 - Maximum Ratio Limit for C01.......... : 2E (4600 MHz)
 - Maximum Ratio Limit for C02.......... : 2D (4500 MHz)
 - Maximum Ratio Limit for C03.......... : 2D (4500 MHz)
 - Maximum Ratio Limit for C04.......... : 2C (4400 MHz)
 - Maximum Ratio Limit for C05.......... : 2C (4400 MHz)
 - Maximum Ratio Limit for C06.......... : 2B (4300 MHz)

IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x1
------------------------------------------
 - Power Policy Preference.............. : 1 (highest performance)

MSR_POWER_CTL....................(0x1FC) : 0x3C005F
------------------------------------------
 - Bi-Directional Processor Hot......... : 1 (enabled)
 - C1E Enable........................... : 1 (enabled)

MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
 - Power Units.......................... : 3 (1/8 Watt)
 - Energy Status Units.................. : 14 (61 micro-Joules)
 - Time Units .......................... : 10 (976.6 micro-Seconds)

MSR_PKG_POWER_LIMIT..............(0x610) : 0x42FFD0001AFFD0
------------------------------------------
 - Package Power Limit #1............... : 4090 Watt
 - Enable Power Limit #1................ : 1 (enabled)
 - Package Clamping Limitation #1....... : 0 (disabled)
 - Time Window for Power Limit #1....... : 13 (20480 milli-Seconds)
 - Package Power Limit #2............... : 4090 Watt
 - Enable Power Limit #2................ : 1 (enabled)
 - Package Clamping Limitation #2....... : 0 (disabled)
 - Time Window for Power Limit #2....... : 33 (10 milli-Seconds)
 - Lock................................. : 0 (MSR not locked)

MSR_PKG_ENERGY_STATUS............(0x611) : 0x76566DF
------------------------------------------
 - Total Energy Consumed................ : 7573 Joules (Watt = Joules / seconds)

MSR_PP0_POWER_LIMIT..............(0x638) : 0x0

MSR_PP0_ENERGY_STATUS............(0x639) : 0x4CC1643
------------------------------------------
 - Total Energy Consumed................ : 4912 Joules (Watt = Joules / seconds)

MSR_PP0_POWER_LIMIT..............(0x638) : 0x0

MSR_PP0_ENERGY_STATUS............(0x639) : 0x4CC16CE
------------------------------------------
 - Total Energy Consumed................ : 4912 Joules (Watt = Joules / seconds)

MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x25
MSR_CONFIG_TDP_LEVEL1............(0x649) : 0x0
MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0x0
MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x80000000
MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0
MSR_PKGC3_IRTL...................(0x60a) : 0x884E
MSR_PKGC6_IRTL...................(0x60b) : 0x8876
MSR_PKGC7_IRTL...................(0x60c) : 0x8894
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x0
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x0
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x0
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x0
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0
MSR_PKG_C7_RESIDENCY.............(0x3fa) : 0x0
MSR_PKG_C8_RESIDENCY.............(0x630) : 0x0
MSR_PKG_C9_RESIDENCY.............(0x631) : 0x0
MSR_PKG_C10_RESIDENCY............(0x632) : 0x0
MSR_PKG_C8_LATENCY...............(0x633) : 0x0
MSR_PKG_C9_LATENCY...............(0x634) : 0x0
MSR_PKG_C10_LATENCY..............(0x635) : 0x0

MSR_PLATFORM_ENERGY_COUNTER......(0x64D) : 0x0 (not supported by hardware/BIOS)

MSR_PPERF........................(0x64E) : 0x35CCECC775
------------------------------------------
 - Hardware workload scalability........ : 231071336309

MSR_CORE_PERF_LIMIT_REASONS......(0x64F) : 0x30001000
------------------------------------------
 - PROCHOT Status....................... : 0
 - Thermal Status....................... : 0
 - Residency State Regulation Status.... : 0
 - Running Average Thermal Limit Status. : 0
 - VR Therm Alert Status................ : 0
 - VR Therm Design Current Status....... : 0
 - Other Status......................... : 0
 - Package/Platform-Level #1 Power Limit : 0
 - Package/Platform-Level #2 Power Limit : 0
 - Max Turbo Limit Status............... : 1 (frequency reduced below OS request due to multi-core turbo limits)
 - Turbo Transition Attenuation Status.. : 0
 - PROCHOT Log.......................... : 0
 - Thermal Log.......................... : 0
 - Residency State Regulation Log....... : 0
 - Running Average Thermal Limit Log.... : 0
 - VR Therm Alert Log................... : 0
 - VR Thermal Design Current Log........ : 0
 - Other Status Log..................... : 0
 - Package/Platform-Level #1 Power Limit : 0
 - Package/Platform-Level #2 Power Limit : 0
 - Max Turbo Limit Log.................. : 1 (status bit has asserted)
 - Turbo Transition Attenuation Log..... : 1 (status bit has asserted)
HDC Supported

IA32_PKG_HDC_CTL.................(0xDB0) : 0x0

IA32_PM_CTL1.....................(0xDB1) : 0x1
------------------------------------------
HDC Allow Block..................(0xDB1) : 1 (HDC blocked)

IA32_THREAD_STALL................(0xDB2) : 0x0

MSR_PKG_HDC_CONFIG...............(0x652) : 0x2
------------------------------------------
Pkg Cx Monitor ..................(0x652) : 2 (count package C3 and deeper)
MSR_CORE_HDC_RESIDENCY...........(0x653) : 0x0

MSR_PKG_HDC_SHALLOW_RESIDENCY....(0x655) : 0x0

MSR_PKG_HDC_DEEP_RESIDENCY.......(0x656) : 0x0

IA32_TSC_DEADLINE................(0x6E0) : 0x179EB73A348
MSR_PPERF........................(0x63E) : 0x1 (36)

IA32_PM_ENABLE...................(0x770) : 0x1 (HWP Supported and Enabled)

IA32_HWP_CAPABILITIES............(0x771) : 0x10A252E
------------------------------------------
 - Highest Performance.................. : 46
 - Guaranteed Performance............... : 37
 - Most Efficient Performance........... : 10
 - Lowest Performance................... : 1

IA32_HWP_INTERRUPT...............(0x773) : 0x1
------------------------------------------
 - Guaranteed Performance Change........ : 1 (Interrupt generated on change of)
 - Excursion Minimum.................... : 0 (Interrupt generation disabled)

IA32_HWP_REQUEST.................(0x774) : 0x2E2E08
------------------------------------------
 - Minimum Performance.................. : 8
 - Maximum Performance.................. : 46
 - Desired Performance.................. : 46
 - Energy Efficient Performance......... : 0
 - Activity Window...................... : 0, 0
 - Package Control...................... : 0

IA32_HWP_STATUS..................(0x777) : 0x0
------------------------------------------
 - Guaranteed Performance Change........ : 0 (has not occured)
 - Excursion To Minimum................. : 0 (has not occured)

CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency...... :  8 ( 800 MHz)
Maximum non-Turbo Ratio/Frequency....... : 37 (3700 MHz)
Maximum Turbo Ratio/Frequency........... : 46 (4600 MHz)
P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ (31) 36 43 ]
CPU C3-Cores [ 0 3 ]
CPU C6-Cores [ 0 1 2 3 ]
CPU P-States [ (22) 31 32 36 43 ]
CPU C3-Cores [ 0 1 3 5 ]
CPU C6-Cores [ 0 1 2 3 5 ]
CPU P-States [ (22) 31 32 36 43 ]
CPU C3-Cores [ 0 1 2 3 5 ]
CPU C3-Cores [ 0 1 2 3 4 5 ]
CPU C6-Cores [ 0 1 2 3 4 5 ]
CPU P-States [ 22 31 32 34 36 (40) 43 ]
CPU P-States [ (13) 22 31 32 34 36 40 43 ]
CPU P-States [ (13) 22 31 32 34 36 37 40 43 ]