Hackintosh Cihazlarda Güç Yönetimi

dgnzcn · 2 Mar 2017

montezuma' Alıntı:
Tamam, güç yönetimi devrede. İşlemcinin kaç Watt güç kullandığını gösteriyor.

Tapatalk Pro kullanarak iPhone aracılığıyla gönderildi

teşekkürler.
ekran güç yönetiminden dolayı zamanında kapanıyor ama 1-2 dk sonra kendiliğinden açılıyor. neden olabilir.

Sonuç nedir sizce?

Kod:

AppleIntelInfo.kext v2.4 Copyright © 2012-2017 Pike R. Alpha. All rights reserved.

Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 1
logCStates...............................: 1
logIPGStyle..............................: 1

Warning: Clover hw.busfrequency error detected : 17d78400
InitialTSC...............................: 0x100c3e9cb49 (40 MHz)
MWAIT C-States...........................: 286531872

Processor Brandstring....................: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz

Processor Signature..................... : 0x806E9
------------------------------------------
 - Family............................... : 6
 - Stepping............................. : 9
 - Model................................ : 0x8E (142)

Model Specific Registers (MSRs)
------------------------------------------

MSR_CORE_THREAD_COUNT............(0x35)  : 0xFFFFFF803A75D800
------------------------------------------
 - Core Count........................... : 2
 - Thread Count......................... : 4

MSR_PLATFORM_INFO................(0xCE)  : 0x4043DF1011B00
------------------------------------------
 - Maximum Non-Turbo Ratio.............. : 0x1B (2700 MHz)
 - Ratio Limit for Turbo Mode........... : 1 (programmable)
 - TDP Limit for Turbo Mode............. : 1 (programmable)
 - Low Power Mode Support............... : 1 (LPM supported)
 - Number of ConfigTDP Levels........... : 2 (additional TDP level(s) available)
 - Maximum Efficiency Ratio............. : 4
 - Minimum Operating Ratio.............. : 4

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x1E008006
------------------------------------------
 - I/O MWAIT Redirection Enable......... : 0 (not enabled)
 - CFG Lock............................. : 1 (MSR locked until next reset)
 - C3 State Auto Demotion............... : 1 (enabled)
 - C1 State Auto Demotion............... : 1 (enabled)
 - C3 State Undemotion.................. : 1 (enabled)
 - C1 State Undemotion.................. : 1 (enabled)
 - Package C-State Auto Demotion........ : 0 (disabled/unsupported)
 - Package C-State Undemotion........... : 0 (disabled/unsupported)

MSR_PMG_IO_CAPTURE_BASE..........(0xE4)  : 0x51814
------------------------------------------
 - LVL_2 Base Address................... : 0x1814
 - C-state Range........................ : 5 (C-States not included, I/O MWAIT redirection not enabled)

IA32_MPERF.......................(0xE7)  : 0x4582EF55C6
IA32_APERF.......................(0xE8)  : 0x1BC07C47FA

MSR_FLEX_RATIO...................(0x194) : 0x0
------------------------------------------

MSR_IA32_PERF_STATUS.............(0x198) : 0x217F00001F00
------------------------------------------
 - Current Performance State Value...... : 0x1F00 (3100 MHz)

MSR_IA32_PERF_CONTROL............(0x199) : 0x1900
------------------------------------------
 - Target performance State Value....... : 0x1900 (2500 MHz)
 - Intel Dynamic Acceleration........... : 0 (IDA engaged)

IA32_CLOCK_MODULATION............(0x19A) : 0x0

IA32_THERM_INTERRUPT.............(0x19B) : 0x10
------------------------------------------
 - High-Temperature Interrupt Enable.... : 0 (disabled)
 - Low-Temperature Interrupt Enable..... : 0 (disabled)
 - PROCHOT# Interrupt Enable............ : 0 (disabled)
 - FORCEPR# Interrupt Enable............ : 0 (disabled)
 - Critical Temperature Interrupt Enable : 1 (enabled)
 - Threshold #1 Value................... : 0
 - Threshold #1 Interrupt Enable........ : 0 (disabled)
 - Threshold #2 Value................... : 0
 - Threshold #2 Interrupt Enable........ : 0 (disabled)
 - Power Limit Notification Enable...... : 0 (disabled)

IA32_THERM_STATUS................(0x19C) : 0x883A0800
------------------------------------------
 - Thermal Status....................... : 0
 - Thermal Log.......................... : 0
 - PROCHOT # or FORCEPR# event.......... : 0
 - PROCHOT # or FORCEPR# log............ : 0
 - Critical Temperature Status.......... : 0
 - Critical Temperature log............. : 0
 - Thermal Threshold #1 Status.......... : 0
 - Thermal Threshold #1 log............. : 0
 - Thermal Threshold #2 Status.......... : 0
 - Thermal Threshold #2 log............. : 0
 - Power Limitation Status.............. : 0
 - Power Limitation log................. : 1
 - Current Limit Status................. : 0
 - Current Limit log.................... : 0
 - Cross Domain Limit Status............ : 0
 - Cross Domain Limit log............... : 0
 - Digital Readout...................... : 58
 - Resolution in Degrees Celsius........ : 1
 - Reading Valid........................ : 1 (valid)

MSR_THERM2_CTL...................(0x19D) : 0x0

IA32_MISC_ENABLES................(0x1A0) : 0x850089
------------------------------------------
 - Fast-Strings......................... : 1 (enabled)
 - FOPCODE compatibility mode Enable.... : 0
 - Automatic Thermal Control Circuit.... : 1 (enabled)
 - Split-lock Disable................... : 0
 - Performance Monitoring............... : 1 (available)
 - Bus Lock On Cache Line Splits Disable : 0
 - Hardware prefetch Disable............ : 0
 - Processor Event Based Sampling....... : 0 (PEBS supported)
 - GV1/2 legacy Enable.................. : 0
 - Enhanced Intel SpeedStep Technology.. : 1 (enabled)
 - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
 - Adjacent sector prefetch Disable..... : 0
 - CFG Lock............................. : 0 (MSR not locked)
 - xTPR Message Disable................. : 1 (disabled)

MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x640000
------------------------------------------
 - Turbo Attenuation Units.............. : 0
 - Temperature Target................... : 100
 - TCC Activation Offset................ : 0

MSR_MISC_PWR_MGMT................(0x1AA) : 0x401CC1
------------------------------------------
 - EIST Hardware Coordination........... : 1 (hardware coordination disabled)
 - Energy/Performance Bias support...... : 1
 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
 - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)

MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x1F1F1F1F
------------------------------------------
 - Maximum Ratio Limit for C01.......... : 1F (3100 MHz)
 - Maximum Ratio Limit for C02.......... : 1F (3100 MHz)

IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x1
------------------------------------------
 - Power Policy Preference...............: 1 (highest performance)

MSR_POWER_CTL....................(0x1FC) : 0x24005F
------------------------------------------
 - Bi-Directional Processor Hot..........: 1 (enabled)
 - C1E Enable............................: 1 (enabled)

MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
 - Power Units.......................... : 3 (1/8 Watt)
 - Energy Status Units.................. : 14 (61 micro-Joules)
 - Time Units .......................... : 10 (976.6 micro-Seconds)

MSR_PKG_POWER_LIMIT..............(0x610) : 0x4280C800DD80C8
------------------------------------------
 - Package Power Limit #1............... : 25 Watt
 - Enable Power Limit #1................ : 1 (enabled)
 - Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1)
 - Time Window for Power Limit #1....... : 110 (163840 milli-Seconds)
 - Package Power Limit #2............... : 25 Watt
 - Enable Power Limit #2................ : 1 (enabled)
 - Package Clamping Limitation #2....... : 0 (disabled)
 - Time Window for Power Limit #2....... : 33 (10 milli-Seconds)
 - Lock................................. : 0 (MSR not locked)

MSR_PKG_ENERGY_STATUS............(0x611) : 0x18AC60F
------------------------------------------
 - Total Energy Consumed................ : 1579 Joules (Watt = Joules / seconds)

MSR_PP1_POWER_LIMIT..............(0x640) : 0x0

MSR_PP1_ENERGY_STATUS............(0x641) : 0x48501
------------------------------------------
 - Total Energy Consumed................ : 18 Joules (Watt = Joules / seconds)

MSR_PP1_POLICY...................(0x642) : 0x18
------------------------------------------
 - Priority Level....................... : 24

MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x19
MSR_CONFIG_TDP_LEVEL1............(0x649) : 0x8003C
MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0x1B00C8
MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x0
MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0
MSR_PKGC3_IRTL...................(0x60a) : 0x884E
MSR_PKGC6_IRTL...................(0x60b) : 0x8876
MSR_PKGC7_IRTL...................(0x60c) : 0x8894
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x57B06E0551
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x1C7059CDD6
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x57B06E0551
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x1C7059CDD6
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0
MSR_PKG_C7_RESIDENCY.............(0x3fa) : 0x0

MSR_PLATFORM_ENERGY_COUNTER......(0x64D) : 0x1C1C67A
------------------------------------------

MSR_PPERF........................(0x64E) : 0x1929B45B08
------------------------------------------
 - Hardware workload scalability........ : 108073868040

MSR_CORE_PERF_LIMIT_REASONS......(0x64F) : 0x8000000
------------------------------------------
 - PROCHOT Status....................... : 0
 - Thermal Status....................... : 0
 - Residency State Regulation Status.... : 0
 - Running Average Thermal Limit Status. : 0
 - VR Therm Alert Status................ : 0
 - VR Therm Design Current Status....... : 0
 - Other Status......................... : 0
 - Package/Platform-Level #1 Power Limit : 0
 - Package/Platform-Level #2 Power Limit : 0
 - Max Turbo Limit Status............... : 0
 - Turbo Transition Attenuation Status.. : 0
 - PROCHOT Log.......................... : 0
 - Thermal Log.......................... : 0
 - Residency State Regulation Log....... : 0
 - Running Average Thermal Limit Log.... : 0
 - VR Therm Alert Log................... : 0
 - VR Thermal Design Current Log........ : 0
 - Other Status Log..................... : 0
 - Package/Platform-Level #1 Power Limit : 0
 - Package/Platform-Level #2 Power Limit : 1 (status bit has asserted)
 - Max Turbo Limit Log.................. : 0
 - Turbo Transition Attenuation Log..... : 0
HDC Supported

IA32_PKG_HDC_CTL.................(0xDB0) : 0x0

IA32_PM_CTL1.....................(0xDB1) : 0x1
------------------------------------------
HDC Allow Block..................(0xDB1) : 1 (HDC blocked)

IA32_THREAD_STALL................(0xDB2) : 0x0

MSR_PKG_HDC_CONFIG...............(0x652) : 0x2
------------------------------------------
Pkg Cx Monitor ..................(0x652) : 2 (count package C3 and deeper)
MSR_CORE_HDC_RESIDENCY...........(0x653) : 0x0

MSR_PKG_HDC_SHALLOW_RESIDENCY....(0x655) : 0x0

MSR_PKG_HDC_DEEP_RESIDENCY.......(0x656) : 0x0

IA32_TSC_DEADLINE................(0x6E0) : 0x100CC0EDF1C
MSR_PPERF........................(0x63E) : 0x1 (24)

IA32_PM_ENABLE...................(0x770) : 0x1 (HWP Supported and Enabled)

IA32_HWP_CAPABILITIES............(0x771) : 0x107191F
-----------------------------------------
 - Highest Performance.................. : 31
 - Guaranteed Performance............... : 25
 - Most Efficient Performance........... : 7
 - Lowest Performance................... : 1

IA32_HWP_INTERRUPT...............(0x773) : 0x0
------------------------------------------
 - Guaranteed Performance Change........ : 0 (Interrupt generation disabled)
 - Excursion Minimum.................... : 0 (Interrupt generation disabled)

IA32_HWP_REQUEST................(0x774) : 0x80002301
-----------------------------------------
 - Minimum Performance................. : 1
 - Maximum Performance................. : 35
 - Desired Performance................. : 0
 - Energy Efficient Performance........ : 128
 - Activity Window..................... : 0, 0
 - Package Control..................... : 0

IA32_HWP_STATUS..................(0x777) : 0x0
-----------------------------------------
 - Guaranteed Performance Change....... : 0 (has not occured)
 - Excursion To Minimum................ : 0 (has not occured)

CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......:  4 ( 400 MHz)
Maximum non-Turbo Ratio/Frequency........: 27 (2700 MHz)
Maximum Turbo Ratio/Frequency............: 31 (3100 MHz)

IGPU Info:
------------------------------------------
IGPU Current Frequency...................:    0 MHz
IGPU Minimum Frequency...................:  300 MHz
IGPU Maximum Non-Turbo Frequency.........:  300 MHz
IGPU Maximum Turbo Frequency.............: 1000 MHz
IGPU Maximum limit.......................: No Limit

P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ (7) 12 31 ] iGPU P-States [ ]
CPU C3-Cores [ 0 1 2 3 ]
CPU C6-Cores [ 0 1 2 3 ]
CPU C7-Cores [ 2 3 ]
CPU P-States [ (7) 12 31 ] iGPU P-States [ ]
CPU P-States [ (7) 10 12 31 ] iGPU P-States [ ]
CPU P-States [ (6) 7 10 12 31 ] iGPU P-States [ ]
CPU P-States [ 6 (7) 10 11 12 31 ] iGPU P-States [ ]
CPU P-States [ 6 7 (8) 10 11 12 31 ] iGPU P-States [ ]

montezuma · 2 Mar 2017

HWP aktif görünüyor.

Kod:

IA32_PM_ENABLE...................(0x770) : 0x1 (HWP Supported and Enabled)

IA32_HWP_CAPABILITIES............(0x771) : 0x107191F
-----------------------------------------
 - Highest Performance.................. : 31
 - Guaranteed Performance............... : 25
 - Most Efficient Performance........... : 7
 - Lowest Performance................... : 1

omercigerci29 · 9 Mar 2017

ben bunlarla fazla uğraşmadım ama şuan intelpowergadget'i açıyorum arkadaşında dediği gibi bendede
power ve frakans kısmında değerler var en alttada sıcaklığı görüyorum, power kısmında w-IA var frekans kısmında
IA-GT var işlemci çoğu zaman 2,60 GHZ olarak görünüyor arada değişiyor bu değer ama genel itibariyle 2.60 sizce sorunlumu ?

montezuma · 10 Mar 2017

En doğru kontrol yöntemi AppleIntelINfo.kext ile koontrol etmek . Bununla yukarıdaki gerekli adımları uygula çıkan sonucu paylaş.

omercigerci29 · 10 Mar 2017

Kod:

Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 1
logCStates...............................: 1
logIPGStyle..............................: 1

Warning: Clover hw.busfrequency error detected : 17d78400
InitialTSC...............................: 0x2ec2d2c3456 (123 MHz)
MWAIT C-States...........................: 270624

Processor Brandstring....................: Intel(R) Core(TM) i7-4720HQ CPU @ 2.60GHz

Processor Signature..................... : 0x306C3
------------------------------------------
 - Family............................... : 6
 - Stepping............................. : 3
 - Model................................ : 0x3C (60)

Model Specific Registers (MSRs)
------------------------------------------

MSR_CORE_THREAD_COUNT............(0x35)  : 0xFFFFFF801D6D6100
------------------------------------------
 - Core Count........................... : 4
 - Thread Count......................... : 8

MSR_PLATFORM_INFO................(0xCE)  : 0x80838F3011A00
------------------------------------------
 - Maximum Non-Turbo Ratio.............. : 0x1A (2600 MHz)
 - Ratio Limit for Turbo Mode........... : 1 (programmable)
 - TDP Limit for Turbo Mode............. : 1 (programmable)
 - Low Power Mode Support............... : 0 (LMP not supported)
 - Number of ConfigTDP Levels........... : 0 (only base TDP level available)
 - Maximum Efficiency Ratio............. : 8
 - Minimum Operating Ratio.............. : 8

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x1E008405
------------------------------------------
 - I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT)
 - CFG Lock............................. : 1 (MSR locked until next reset)
 - C3 State Auto Demotion............... : 1 (enabled)
 - C1 State Auto Demotion............... : 1 (enabled)
 - C3 State Undemotion.................. : 1 (enabled)
 - C1 State Undemotion.................. : 1 (enabled)
 - Package C-State Auto Demotion........ : 0 (disabled/unsupported)
 - Package C-State Undemotion........... : 0 (disabled/unsupported)

MSR_PMG_IO_CAPTURE_BASE..........(0xE4)  : 0x21814
------------------------------------------
 - LVL_2 Base Address................... : 0x1814
 - C-state Range........................ : 2 (C7 is the max C-State to include)

IA32_MPERF.......................(0xE7)  : 0x7E42EB575C
IA32_APERF.......................(0xE8)  : 0x804E19BE53

MSR_FLEX_RATIO...................(0x194) : 0x40000
------------------------------------------

MSR_IA32_PERF_STATUS.............(0x198) : 0x1AAA00001A00
------------------------------------------
 - Current Performance State Value...... : 0x1A00 (2600 MHz)

MSR_IA32_PERF_CONTROL............(0x199) : 0x2400
------------------------------------------
 - Target performance State Value....... : 0x2400 (3600 MHz)
 - Intel Dynamic Acceleration........... : 0 (IDA engaged)

IA32_CLOCK_MODULATION............(0x19A) : 0x0

IA32_THERM_INTERRUPT.............(0x19B) : 0x10
------------------------------------------
 - High-Temperature Interrupt Enable.... : 0 (disabled)
 - Low-Temperature Interrupt Enable..... : 0 (disabled)
 - PROCHOT# Interrupt Enable............ : 0 (disabled)
 - FORCEPR# Interrupt Enable............ : 0 (disabled)
 - Critical Temperature Interrupt Enable : 1 (enabled)
 - Threshold #1 Value................... : 0
 - Threshold #1 Interrupt Enable........ : 0 (disabled)
 - Threshold #2 Value................... : 0
 - Threshold #2 Interrupt Enable........ : 0 (disabled)
 - Power Limit Notification Enable...... : 0 (disabled)

IA32_THERM_STATUS................(0x19C) : 0x88280808
------------------------------------------
 - Thermal Status....................... : 0
 - Thermal Log.......................... : 0
 - PROCHOT # or FORCEPR# event.......... : 0
 - PROCHOT # or FORCEPR# log............ : 1
 - Critical Temperature Status.......... : 0
 - Critical Temperature log............. : 0
 - Thermal Threshold #1 Status.......... : 0
 - Thermal Threshold #1 log............. : 0
 - Thermal Threshold #2 Status.......... : 0
 - Thermal Threshold #2 log............. : 0
 - Power Limitation Status.............. : 0
 - Power Limitation log................. : 1
 - Current Limit Status................. : 0
 - Current Limit log.................... : 0
 - Cross Domain Limit Status............ : 0
 - Cross Domain Limit log............... : 0
 - Digital Readout...................... : 40
 - Resolution in Degrees Celsius........ : 1
 - Reading Valid........................ : 1 (valid)

MSR_THERM2_CTL...................(0x19D) : 0x0

IA32_MISC_ENABLES................(0x1A0) : 0x850089
------------------------------------------
 - Fast-Strings......................... : 1 (enabled)
 - FOPCODE compatibility mode Enable.... : 0
 - Automatic Thermal Control Circuit.... : 1 (enabled)
 - Split-lock Disable................... : 0
 - Performance Monitoring............... : 1 (available)
 - Bus Lock On Cache Line Splits Disable : 0
 - Hardware prefetch Disable............ : 0
 - Processor Event Based Sampling....... : 0 (PEBS supported)
 - GV1/2 legacy Enable.................. : 0
 - Enhanced Intel SpeedStep Technology.. : 1 (enabled)
 - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
 - Adjacent sector prefetch Disable..... : 0
 - CFG Lock............................. : 0 (MSR not locked)
 - xTPR Message Disable................. : 1 (disabled)

MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x2641000
------------------------------------------
 - Turbo Attenuation Units.............. : 0
 - Temperature Target................... : 100
 - TCC Activation Offset................ : 2

MSR_MISC_PWR_MGMT................(0x1AA) : 0x400001
------------------------------------------
 - EIST Hardware Coordination........... : 1 (hardware coordination disabled)
 - Energy/Performance Bias support...... : 1
 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
 - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)

MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x22222324
------------------------------------------
 - Maximum Ratio Limit for C01.......... : 24 (3600 MHz)
 - Maximum Ratio Limit for C02.......... : 23 (3500 MHz)
 - Maximum Ratio Limit for C03.......... : 22 (3400 MHz)
 - Maximum Ratio Limit for C04.......... : 22 (3400 MHz)

IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x5
------------------------------------------
 - Power Policy Preference...............: 5 (balanced performance and energy saving)

MSR_POWER_CTL....................(0x1FC) : 0x4005F
------------------------------------------
 - Bi-Directional Processor Hot..........: 1 (enabled)
 - C1E Enable............................: 1 (enabled)

MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
 - Power Units.......................... : 3 (1/8 Watt)
 - Energy Status Units.................. : 14 (61 micro-Joules)
 - Time Units .......................... : 10 (976.6 micro-Seconds)

MSR_PKG_POWER_LIMIT..............(0x610) : 0x804281D600208178
------------------------------------------
 - Package Power Limit #1............... : 47 Watt
 - Enable Power Limit #1................ : 1 (enabled)
 - Package Clamping Limitation #1....... : 0 (disabled)
 - Time Window for Power Limit #1....... : 16 (163840 milli-Seconds)
 - Package Power Limit #2............... : 58 Watt
 - Enable Power Limit #2................ : 1 (enabled)
 - Package Clamping Limitation #2....... : 0 (disabled)
 - Time Window for Power Limit #2....... : 33 (10 milli-Seconds)
 - Lock................................. : 1 (MSR locked until next reset)

MSR_PKG_ENERGY_STATUS............(0x611) : 0x7B5EE75
------------------------------------------
 - Total Energy Consumed................ : 7895 Joules (Watt = Joules / seconds)

MSR_PP0_POWER_LIMIT..............(0x638) : 0x0

MSR_PP0_ENERGY_STATUS............(0x639) : 0x2D0CBCA
------------------------------------------
 - Total Energy Consumed................ : 2883 Joules (Watt = Joules / seconds)

MSR_PP0_POWER_LIMIT..............(0x638) : 0x0

MSR_PP0_ENERGY_STATUS............(0x639) : 0x2D0CC14
------------------------------------------
 - Total Energy Consumed................ : 2883 Joules (Watt = Joules / seconds)

MSR_PP1_POWER_LIMIT..............(0x640) : 0x0

MSR_PP1_ENERGY_STATUS............(0x641) : 0x1906E4
------------------------------------------
 - Total Energy Consumed................ : 100 Joules (Watt = Joules / seconds)

MSR_PP1_POLICY...................(0x642) : 0x18
------------------------------------------
 - Priority Level....................... : 24

MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x1A
MSR_CONFIG_TDP_LEVEL1............(0x649) : 0x0
MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0x0
MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x80000000
MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0
MSR_PKGC3_IRTL...................(0x60a) : 0x8842
MSR_PKGC6_IRTL...................(0x60b) : 0x8873
MSR_PKGC7_IRTL...................(0x60c) : 0x8891
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x9F953CEF9E
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x140BF03777E
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x9F953CEF9E
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x140BF03777E
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0
MSR_PKG_C7_RESIDENCY.............(0x3fa) : 0x0

IA32_TSC_DEADLINE................(0x6E0) : 0x2EC31178741

CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......:  8 ( 800 MHz)
Maximum non-Turbo Ratio/Frequency........: 26 (2600 MHz)
Maximum Turbo Ratio/Frequency............: 36 (3600 MHz)

IGPU Info:
------------------------------------------
IGPU Current Frequency...................:  200 MHz
IGPU Minimum Frequency...................:  200 MHz
IGPU Maximum Non-Turbo Frequency.........:  400 MHz
IGPU Maximum Turbo Frequency.............: 1200 MHz
IGPU Maximum limit.......................: No Limit

P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ (8) 26 28 ] iGPU P-States [ (4) ]
CPU C3-Cores [ 0 1 4 6 ]
CPU C6-Cores [ 1 4 6 7 ]
CPU C7-Cores [ 0 1 3 4 7 ]
CPU C3-Cores [ 0 1 3 4 5 6 ]
CPU C6-Cores [ 1 2 3 4 6 7 ]
CPU C7-Cores [ 0 1 3 4 6 7 ]
CPU P-States [ (8) 26 27 28 ] iGPU P-States [ (4) ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 ]
CPU C7-Cores [ 0 1 2 3 4 6 7 ]
CPU P-States [ 8 25 (26) 27 28 ] iGPU P-States [ (4) ]
CPU C7-Cores [ 0 1 2 3 4 5 6 7 ]
CPU C3-Cores [ 0 1 3 4 5 6 7 ]

montezuma · 10 Mar 2017

@omercigerci29

Kod:

cat /tmp/AppleIntelInfo.dat

Komutunu bir çok kere kullanarak daha ayrıntılı speedstep çıktısı almaya çalış.

omercigerci29 · 10 Mar 2017

Kod:

Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 1
logCStates...............................: 1
logIPGStyle..............................: 1

Warning: Clover hw.busfrequency error detected : 17d78400
InitialTSC...............................: 0x4352d1f40d0 (177 MHz)
MWAIT C-States...........................: 270624

Processor Brandstring....................: Intel(R) Core(TM) i7-4720HQ CPU @ 2.60GHz

Processor Signature..................... : 0x306C3
------------------------------------------
 - Family............................... : 6
 - Stepping............................. : 3
 - Model................................ : 0x3C (60)

Model Specific Registers (MSRs)
------------------------------------------

MSR_CORE_THREAD_COUNT............(0x35)  : 0xFFFFFF8035DCA800
------------------------------------------
 - Core Count........................... : 4
 - Thread Count......................... : 8

MSR_PLATFORM_INFO................(0xCE)  : 0x80838F3011A00
------------------------------------------
 - Maximum Non-Turbo Ratio.............. : 0x1A (2600 MHz)
 - Ratio Limit for Turbo Mode........... : 1 (programmable)
 - TDP Limit for Turbo Mode............. : 1 (programmable)
 - Low Power Mode Support............... : 0 (LMP not supported)
 - Number of ConfigTDP Levels........... : 0 (only base TDP level available)
 - Maximum Efficiency Ratio............. : 8
 - Minimum Operating Ratio.............. : 8

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x1E008405
------------------------------------------
 - I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT)
 - CFG Lock............................. : 1 (MSR locked until next reset)
 - C3 State Auto Demotion............... : 1 (enabled)
 - C1 State Auto Demotion............... : 1 (enabled)
 - C3 State Undemotion.................. : 1 (enabled)
 - C1 State Undemotion.................. : 1 (enabled)
 - Package C-State Auto Demotion........ : 0 (disabled/unsupported)
 - Package C-State Undemotion........... : 0 (disabled/unsupported)

MSR_PMG_IO_CAPTURE_BASE..........(0xE4)  : 0x21814
------------------------------------------
 - LVL_2 Base Address................... : 0x1814
 - C-state Range........................ : 2 (C7 is the max C-State to include)

IA32_MPERF.......................(0xE7)  : 0x1B8BACF9A2
IA32_APERF.......................(0xE8)  : 0x201940ABC2

MSR_FLEX_RATIO...................(0x194) : 0x40000
------------------------------------------

MSR_IA32_PERF_STATUS.............(0x198) : 0x1FC300002000
------------------------------------------
 - Current Performance State Value...... : 0x2000 (3200 MHz)

MSR_IA32_PERF_CONTROL............(0x199) : 0x2400
------------------------------------------
 - Target performance State Value....... : 0x2400 (3600 MHz)
 - Intel Dynamic Acceleration........... : 0 (IDA engaged)

IA32_CLOCK_MODULATION............(0x19A) : 0x0

IA32_THERM_INTERRUPT.............(0x19B) : 0x10
------------------------------------------
 - High-Temperature Interrupt Enable.... : 0 (disabled)
 - Low-Temperature Interrupt Enable..... : 0 (disabled)
 - PROCHOT# Interrupt Enable............ : 0 (disabled)
 - FORCEPR# Interrupt Enable............ : 0 (disabled)
 - Critical Temperature Interrupt Enable : 1 (enabled)
 - Threshold #1 Value................... : 0
 - Threshold #1 Interrupt Enable........ : 0 (disabled)
 - Threshold #2 Value................... : 0
 - Threshold #2 Interrupt Enable........ : 0 (disabled)
 - Power Limit Notification Enable...... : 0 (disabled)

IA32_THERM_STATUS................(0x19C) : 0x88260808
------------------------------------------
 - Thermal Status....................... : 0
 - Thermal Log.......................... : 0
 - PROCHOT # or FORCEPR# event.......... : 0
 - PROCHOT # or FORCEPR# log............ : 1
 - Critical Temperature Status.......... : 0
 - Critical Temperature log............. : 0
 - Thermal Threshold #1 Status.......... : 0
 - Thermal Threshold #1 log............. : 0
 - Thermal Threshold #2 Status.......... : 0
 - Thermal Threshold #2 log............. : 0
 - Power Limitation Status.............. : 0
 - Power Limitation log................. : 1
 - Current Limit Status................. : 0
 - Current Limit log.................... : 0
 - Cross Domain Limit Status............ : 0
 - Cross Domain Limit log............... : 0
 - Digital Readout...................... : 38
 - Resolution in Degrees Celsius........ : 1
 - Reading Valid........................ : 1 (valid)

MSR_THERM2_CTL...................(0x19D) : 0x0

IA32_MISC_ENABLES................(0x1A0) : 0x850089
------------------------------------------
 - Fast-Strings......................... : 1 (enabled)
 - FOPCODE compatibility mode Enable.... : 0
 - Automatic Thermal Control Circuit.... : 1 (enabled)
 - Split-lock Disable................... : 0
 - Performance Monitoring............... : 1 (available)
 - Bus Lock On Cache Line Splits Disable : 0
 - Hardware prefetch Disable............ : 0
 - Processor Event Based Sampling....... : 0 (PEBS supported)
 - GV1/2 legacy Enable.................. : 0
 - Enhanced Intel SpeedStep Technology.. : 1 (enabled)
 - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
 - Adjacent sector prefetch Disable..... : 0
 - CFG Lock............................. : 0 (MSR not locked)
 - xTPR Message Disable................. : 1 (disabled)

MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x2641000
------------------------------------------
 - Turbo Attenuation Units.............. : 0
 - Temperature Target................... : 100
 - TCC Activation Offset................ : 2

MSR_MISC_PWR_MGMT................(0x1AA) : 0x400001
------------------------------------------
 - EIST Hardware Coordination........... : 1 (hardware coordination disabled)
 - Energy/Performance Bias support...... : 1
 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
 - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)

MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x22222324
------------------------------------------
 - Maximum Ratio Limit for C01.......... : 24 (3600 MHz)
 - Maximum Ratio Limit for C02.......... : 23 (3500 MHz)
 - Maximum Ratio Limit for C03.......... : 22 (3400 MHz)
 - Maximum Ratio Limit for C04.......... : 22 (3400 MHz)

IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x5
------------------------------------------
 - Power Policy Preference...............: 5 (balanced performance and energy saving)

MSR_POWER_CTL....................(0x1FC) : 0x4005F
------------------------------------------
 - Bi-Directional Processor Hot..........: 1 (enabled)
 - C1E Enable............................: 1 (enabled)

MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
 - Power Units.......................... : 3 (1/8 Watt)
 - Energy Status Units.................. : 14 (61 micro-Joules)
 - Time Units .......................... : 10 (976.6 micro-Seconds)

MSR_PKG_POWER_LIMIT..............(0x610) : 0x804281D600208178
------------------------------------------
 - Package Power Limit #1............... : 47 Watt
 - Enable Power Limit #1................ : 1 (enabled)
 - Package Clamping Limitation #1....... : 0 (disabled)
 - Time Window for Power Limit #1....... : 16 (163840 milli-Seconds)
 - Package Power Limit #2............... : 58 Watt
 - Enable Power Limit #2................ : 1 (enabled)
 - Package Clamping Limitation #2....... : 0 (disabled)
 - Time Window for Power Limit #2....... : 33 (10 milli-Seconds)
 - Lock................................. : 1 (MSR locked until next reset)

MSR_PKG_ENERGY_STATUS............(0x611) : 0xB84579D
------------------------------------------
 - Total Energy Consumed................ : 11793 Joules (Watt = Joules / seconds)

MSR_PP0_POWER_LIMIT..............(0x638) : 0x0

MSR_PP0_ENERGY_STATUS............(0x639) : 0x4456476
------------------------------------------
 - Total Energy Consumed................ : 4373 Joules (Watt = Joules / seconds)

MSR_PP0_POWER_LIMIT..............(0x638) : 0x0

MSR_PP0_ENERGY_STATUS............(0x639) : 0x44564C6
------------------------------------------
 - Total Energy Consumed................ : 4373 Joules (Watt = Joules / seconds)

MSR_PP1_POWER_LIMIT..............(0x640) : 0x0

MSR_PP1_ENERGY_STATUS............(0x641) : 0x29DB90
------------------------------------------
 - Total Energy Consumed................ : 167 Joules (Watt = Joules / seconds)

MSR_PP1_POLICY...................(0x642) : 0x18
------------------------------------------
 - Priority Level....................... : 24

MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x1A
MSR_CONFIG_TDP_LEVEL1............(0x649) : 0x0
MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0x0
MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x80000000
MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0
MSR_PKGC3_IRTL...................(0x60a) : 0x8842
MSR_PKGC6_IRTL...................(0x60b) : 0x8873
MSR_PKGC7_IRTL...................(0x60c) : 0x8891
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0xE0CF6D85F4
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x1B7B58DB7DC
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0xE0CF6D85F4
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x1B7B58DB7DC
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0
MSR_PKG_C7_RESIDENCY.............(0x3fa) : 0x0

IA32_TSC_DEADLINE................(0x6E0) : 0x4352F9542E1

CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......:  8 ( 800 MHz)
Maximum non-Turbo Ratio/Frequency........: 26 (2600 MHz)
Maximum Turbo Ratio/Frequency............: 36 (3600 MHz)

IGPU Info:
------------------------------------------
IGPU Current Frequency...................:  200 MHz
IGPU Minimum Frequency...................:  200 MHz
IGPU Maximum Non-Turbo Frequency.........:  400 MHz
IGPU Maximum Turbo Frequency.............: 1200 MHz
IGPU Maximum limit.......................: No Limit

P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ 28 (34) 35 ] iGPU P-States [ (4) ]
CPU C3-Cores [ 0 1 4 ]
CPU C6-Cores [ 0 1 4 6 ]
CPU C7-Cores [ 1 2 3 5 7 ]
CPU P-States [ 27 28 (32) 34 35 ] iGPU P-States [ (4) ]
CPU C3-Cores [ 0 1 2 3 4 ]
CPU C6-Cores [ 0 1 2 3 4 6 ]
CPU C7-Cores [ 1 2 3 4 5 7 ]
CPU P-States [ (8) 27 28 30 32 34 35 ] iGPU P-States [ (4) ]
CPU C6-Cores [ 0 1 2 3 4 6 7 ]
CPU C7-Cores [ 0 1 2 3 4 5 6 7 ]
CPU P-States [ 8 (26) 27 28 30 32 34 35 ] iGPU P-States [ (4) ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 ]
CPU P-States [ (8) 26 27 28 29 30 32 34 35 ] iGPU P-States [ (4) ]
CPU C3-Cores [ 0 1 2 3 4 7 ]
CPU C3-Cores [ 0 1 2 3 4 5 6 7 ]
CPU P-States [ 8 25 (26) 27 28 29 30 32 34 35 ] iGPU P-States [ (4) ]
CPU P-States [ 8 25 26 27 28 29 30 (31) 32 34 35 ] iGPU P-States [ (4) ]
CPU P-States [ (8) 22 25 26 27 28 29 30 31 32 34 35 ] iGPU P-States [ (4) ]
CPU P-States [ (8) 21 22 25 26 27 28 29 30 31 32 34 35 ] iGPU P-States [ (4) ]
CPU P-States [ 8 21 22 25 (26) 27 28 29 30 31 32 34 35 ] iGPU P-States [ 4 (5) ]
CPU P-States [ (8) 21 22 23 25 26 27 28 29 30 31 32 34 35 ] iGPU P-States [ (4) 5 ]
U P-States [ 4 (5) 6 ]
CPU P-States [ 8 20 21 22 23 24 25 26 27 28 31 32 (34) ] iGPU P-States [ (4) 5 6 ]
CPU P-States [ 8 20 21 22 23 24 25 26 27 28 31 32 34 (35) ] iGPU P-States [ (4) 5 6 ]
CPU P-States [ 8 20 21 22 23 24 25 (26) 27 28 29 31 32 34 35 ] iGPU P-States [ (4) 5 6 ]
CPU P-States [ 8 20 21 22 23 24 25 (26) 27 28 29 30 31 32 34 35 ] iGPU P-States [ (4) 5 6 ]
CPU P-States [ 8 20 21 22 23 24 25 26 27 28 29 30 (31) 32 34 35 ] iGPU P-States [ 4 5 6 (10) ]
CPU P-States [ 8 20 21 22 23 24 25 (26) 27 28 29 30 31 32 34 35 ] iGPU P-States [ 4 5 6 (9) 10 ]
CPU P-States [ 8 20 21 22 23 24 25 (26) 27 28 29 30 31 32 34 35 ] iGPU P-States [ 4 5 6 (8) 9 10 ]
CPU P-States [ 8 20 21 22 23 24 25 26 27 28 29 30 31 32 33 (34) 35 ] iGPU P-States [ (4) 5 6 8 9 10 ]
bash-3.2#

4-5 kere yazdım hep aynı sonuca ulaşıyor

montezuma · 10 Mar 2017

Güç yönetimi çalışıyor. Konundaki sorun kurduğun kextler yada kullandığın aygıtlar ile alakalıdır.

TolgaOz · 4 May 2017

Hocam sistem bu mac hakkında kısmında pro retina 13" late 2013 gözüküyor terminalde ise MacBook Air cihazım uykuya girince geri uyanmıyor ve powernap gözükmüyor. Çıktıda bir gariplik var mı

Kod:

Tolga-MacBook-Air:~ tolgaoz$ cd ~
Tolga-MacBook-Air:~ tolgaoz$ curl -o ./ssdtPRGen.sh https://raw.githubusercontent.com/Piker-Alpha/ssdtPRGen.sh/Beta/ssdtPRGen.sh
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  153k  100  153k    0     0  88500      0  0:00:01  0:00:01 --:--:-- 88498
Tolga-MacBook-Air:~ tolgaoz$ chmod +x ./ssdtPRGen.sh
Tolga-MacBook-Air:~ tolgaoz$ ./ssdtPRGen.sh











ssdtPRGen.sh v0.9  Copyright (c) 2011-2012 by † RevoGirl
             v6.6  Copyright (c) 2013 by † Jeroen
             v21.5 Copyright (c) 2013-2017 by Pike R. Alpha
-----------------------------------------------------------
Bugs > https://github.com/Piker-Alpha/ssdtPRGen.sh/issues <

System information: Mac OS X 10.12 (16A323)
Brandstring: "Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz"

Version: models.cfg v170 / Skylake.cfg v193


Scope (_PR_) {222 bytes} with ACPI Processor declarations found in DSDT (ACPI 1.0 compliant)
Generating ssdt.dsl for a 'MacBookPro11,1' with board-id [Mac-189A3D4F975D5FFC]
Skylake Core i7-6700HQ processor [0x506E3] setup [0x0705]
With a maximum TDP of 45 Watt, as specified by Intel
Number logical CPU's: 8 (Core Frequency: 2600 MHz)
Number of Turbo States: 9 (2700-3500 MHz)
Number of P-States: 31 (500-3500 MHz)
Adjusting C-States for detected (mobile) processor
Injected C-States for CPU0 (C1,C3,C6,C7)
Injected C-States for CPU1 (C1,C2,C3,C6,C7)
Warning: 'cpu-type' may be set improperly (0x0705 instead of 0x0905)
     - Clover users should read https://clover-wiki.zetam.org/Configuration/CPU#cpu_type
Error: board-id [Mac-189A3D4F975D5FFC] not supported by Skylake – check SMBIOS data / use the -target option

Do you want to continue (y/n)?

montezuma · 4 May 2017

Kullandığın sistem kimliği hata veriyor. MacBookPro11,1 sistem kimliği Skylake ile uyumlu değil. Kullanman gereken sistem kimliği MacBookPro13,1 olmalı.

TolgaOz · 8 May 2017

montezuma' Alıntı:
Kullandığın sistem kimliği hata veriyor. MacBookPro11,1 sistem kimliği Skylake ile uyumlu değil. Kullanman gereken sistem kimliği MacBookPro13,1 olmalı.

MacBookPro 13.3 ve 13.1 hata verdi
WhatsApp Image 2017-05-08 at 20.31.35.jpeg - Google Drive

montezuma · 8 May 2017

Config dosyanı paylaş bir bakalım.

TolgaOz · 10 May 2017

Config.plist - Google Drive Hocam temiz kurulum yaptım hiçbir şey kurulu değil.

montezuma · 11 May 2017

TolgaOz' Alıntı:
Config.plist - Google Drive Hocam temiz kurulum yaptım hiçbir şey kurulu değil.

Sistem bilgilerini ayrıntılı paylaşırsan sevinirim.

TolgaOz · 11 May 2017

montezuma' Alıntı:
Sistem bilgilerini ayrıntılı paylaşırsan sevinirim.

Sistem Özellikleri:
Asus X550VX-DM263TC
İşlemci i7 6700HQ HD530
12GB ddr4 ram
GTX950 2gb
SSD: Sandisk Ultra II 480 GB
Eternet: Realtek PCIe GBE Family
Wifi: Realtek RTL8723BE
Ses: Realtek ALC3236
Windows 10 pro Dualboot

montezuma · 12 May 2017

Bu config ile tekrar dene. Config.plist.zip
Ek olarak kullandığın ssdtPRgen.sh betiğin güncel versiyonunu kullandığından emin ol. Yani şu kodları kullanarak Skylake için uygun betiği kullan;

Kod:

cd ~
curl -o ./ssdtPRGen.sh https://raw.githubusercontent.com/Piker-Alpha/ssdtPRGen.sh/Beta/ssdtPRGen.sh
chmod +x ./ssdtPRGen.sh

TolgaOz · 21 May 2017

Hocam verdiğiniz config dosyasını atınca ekranda yuvarlak içinde / simgesi çıkıp kapanıyor sistem.

Son çalışan dosyam ise config.plist çalışan.zip - Google Drive

Betiği güncelledikten sonra powerNap etkinleşti ama sistem hala 11.1

montezuma · 21 May 2017

Şununla bir dene;

TolgaOz · 21 May 2017

montezuma' Alıntı:
Şununla bir dene;

cce- kısmını silip attım yine çalışmadı.

montezuma · 21 May 2017

BIOS ayarlarında Güç yönetimi ile ilgili bir ayar var mı? Varsa bunlar nedir? Çalışan config dosyasını kullanarak sistemi tekrar boot et ve Terminal açıp -şu komutları gir çıkan sonucu paylaş.

Kod:

kextstat|grep -y applelpc
kextstat|grep -y acpiplat
kextstat|grep -y x86plat

	Benzer konular	Forum
	OpenCore İle Hackintosh Cihazlarda Uyku Problemlerini Düzeltme	OpenCore Rehberler
	OpenCore ile Hackintosh Cihazlarda Güç Yönetimi	OpenCore Rehberler
	Hackintosh Laptop Cihazlarda Pil Göstergesi için DSDT Yamalamak	OS X INFO KÜTÜPHANESİ
	MacOS Mojave'da AppleALC.kext ile Hackintosh Cihazlarda Ses Aktif Etmek	OS X INFO KÜTÜPHANESİ
	Hackintosh Cihazlarda Anti Virus Programı Kullanılmalı mı?	Hackintosh Soru-Cevap

Hackintosh Cihazlarda Güç Yönetimi

APPRENTICE

MASTER YODA

JEDI

MASTER YODA

JEDI

MASTER YODA

JEDI

MASTER YODA

APPRENTICE

MASTER YODA

APPRENTICE

MASTER YODA

APPRENTICE

MASTER YODA

APPRENTICE

MASTER YODA

Ekli dosyalar

APPRENTICE

MASTER YODA

Ekli dosyalar

APPRENTICE

MASTER YODA

Benzer konular