Hackintosh Cihazlarda Güç Yönetimi

kodflex · 22 Ocak 2018

Merhabalar. Geçen hafta içerisinde high sierra kurulumunu hazırlanan rehberle birlikte gerçekleştirdim. Mavi dişin çalışmaması dışında herhangi bir sıkıntı gözükmüyor. Güç yönetimi konusunda herhangi bir işlem yapmadım. Yapılmasına lüzum var mı. ? Sistemin ihtiyacı olup olmadığını anlayabilir miyiz. ? Teşekkürler.

montezuma · 22 Ocak 2018

1.mesajda anlatıldığı gibi yardımcı program ile güç yönetimini kontrol et. Çalışıyorsa yapmana gerek yok demektir.

kodflex · 23 Ocak 2018

montezuma' Alıntı:
1.mesajda anlatıldığı gibi yardımcı program ile güç yönetimini kontrol et. Çalışıyorsa yapmana gerek yok demektir.

Teşekkürler. Kontrol ettiğimde program çalışıyor. İntel Power Manager.

Noctua · 31 Ocak 2018

Intel Power Gadget Kurmaya çalışırken hata alıyorum: This software only works with 2nd gen Intel processors or later.

SMBIOS: MacbookPro 14,1

Ancak konuda gördüğüm mesajlara göre terminalden kontrol ettiğimde güç yönetimi çalışıyor görünüyor sanırım.

montezuma · 31 Ocak 2018

MapleOwl' Alıntı:
Intel Power Gadget Kurmaya çalışırken hata alıyorum: This software only works with 2nd gen Intel processors or later.

Güncel versiyonunu dene;
https://software.intel.com/file/613985/download

Noctua · 31 Ocak 2018

montezuma' Alıntı:
Güncel versiyonunu dene;
https://software.intel.com/file/613985/download

Frekans değiştikçe Watt değeri değişiyor. Anladığım kadarıyla çalışıyor.

Ekran Görüntüsü:

sentin · 1 Şub 2018

Sierrada çalışan ssdt.aml high sierrada çalışmıyor. config dosyam ve ssdt dosyam bir bakarmısınız? montezuma hocam
config.plist - Google Drive
DSDT.aml - Google Drive

montezuma · 2 Şub 2018

sentin' Alıntı:
Sierrada çalışan ssdt.aml high sierrada çalışmıyor. config dosyam ve ssdt dosyam bir bakarmısınız? montezuma hocam

DSDT / SSDT dosyalarını tekrar oluşturup bunları yeniden yamalaman gerekiyor.

melih_11 · 17 Mar 2018

Durum bu. Önceki konularda bahsettiğim gibi MacBook Pro ile benim işlemcim aynı, herhangi bir işlem yapmadım. Evet bir değişim var ama bu değerler çok az değil mi ? Ona göre birkaç kez kodla kontrol etmeyi düşünüyorum.

Barsa95 · 15 Nis 2018

hocam benim işlemcim 7500U, intel speed shift özelliğini destekliyor ve config dosyasından HWP_enable yazarak aktif ettim. speed shift yeterli mi yoksa bu işlemleri de yapmamda fayda var mı?

montezuma · 15 Nis 2018

ilk konudaki AppleINtelPowerInfo ile aldığın raporu kontrol et. İlk mesajdaki örnek resimdeki gibiyse çalışıyor demektir.

fresky · 26 May 2018

Ben bütün anlatılanları yaptım fakat cpu0 ın altına x86 gelmiyor

montezuma · 26 May 2018

Sistem bilgisi nedir? Sistemine uygun SMBIOS kullanıyor musun?

fresky · 26 May 2018

montezuma' Alıntı:
Sistem bilgisi nedir? Sistemine uygun SMBIOS kullanıyor musun?

15.1 mac kullandım işlemcim 4790k e kartı hd6570

montezuma · 27 May 2018

iMac 14,xx sürümler ile dene.

fresky · 28 May 2018

montezuma' Alıntı:
iMac 14,xx sürümler ile dene.

14.1 14.2 14.3 14.4 15.1 denedim olmadı hiç birinde . her seferinde adımları baştan uygulayıp restart attıktan sonra geçtim gene x86 görünmüyor

hamzadural · 29 May 2018

Kod:

AppleIntelInfo.kext v2.4 Copyright © 2012-2017 Pike R. Alpha. All rights reserved.
enableHWP................................: 0
Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 1
logCStates...............................: 1
logIPGStyle..............................: 1
InitialTSC...............................: 0x438d7e1241e (185 MHz)
MWAIT C-States...........................: 286531872
Processor Brandstring....................: Intel(R) Core(TM) i5-7300HQ CPU @ 2.50GHz
Processor Signature..................... : 0x906E9
------------------------------------------
 - Family............................... : 6
 - Stepping............................. : 9
 - Model................................ : 0x9E (158)
Model Specific Registers (MSRs)
------------------------------------------
MSR_CORE_THREAD_COUNT............(0x35)  : 0xFFFFFF8023963200
------------------------------------------
 - Core Count........................... : 4
 - Thread Count......................... : 4
MSR_PLATFORM_INFO................(0xCE)  : 0x8083BF1011900
------------------------------------------
 - Maximum Non-Turbo Ratio.............. : 0x19 (2500 MHz)
 - Ratio Limit for Turbo Mode........... : 1 (programmable)
 - TDP Limit for Turbo Mode............. : 1 (programmable)
 - Low Power Mode Support............... : 1 (LPM supported)
 - Number of ConfigTDP Levels........... : 1 (additional TDP level(s) available)
 - Maximum Efficiency Ratio............. : 8
 - Minimum Operating Ratio.............. : 8
MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x1E000007
------------------------------------------
 - I/O MWAIT Redirection Enable......... : 0 (not enabled)
 - CFG Lock............................. : 0 (MSR not locked)
 - C3 State Auto Demotion............... : 1 (enabled)
 - C1 State Auto Demotion............... : 1 (enabled)
 - C3 State Undemotion.................. : 1 (enabled)
 - C1 State Undemotion.................. : 1 (enabled)
 - Package C-State Auto Demotion........ : 0 (disabled/unsupported)
 - Package C-State Undemotion........... : 0 (disabled/unsupported)
MSR_PMG_IO_CAPTURE_BASE..........(0xE4)  : 0x51814
------------------------------------------
 - LVL_2 Base Address................... : 0x1814
 - C-state Range........................ : 5 (C-States not included, I/O MWAIT redirection not enabled)
IA32_MPERF.......................(0xE7)  : 0xB7A4E2809B
IA32_APERF.......................(0xE8)  : 0x7B34E924B0
MSR_FLEX_RATIO...................(0x194) : 0x0
------------------------------------------
MSR_IA32_PERF_STATUS.............(0x198) : 0x16AA00000D00
------------------------------------------
 - Current Performance State Value...... : 0xD00 (1300 MHz)
MSR_IA32_PERF_CONTROL............(0x199) : 0xD00
------------------------------------------
 - Target performance State Value....... : 0xD00 (1300 MHz)
 - Intel Dynamic Acceleration........... : 0 (IDA engaged)
IA32_CLOCK_MODULATION............(0x19A) : 0x0
IA32_THERM_INTERRUPT.............(0x19B) : 0x10
------------------------------------------
 - High-Temperature Interrupt Enable.... : 0 (disabled)
 - Low-Temperature Interrupt Enable..... : 0 (disabled)
 - PROCHOT# Interrupt Enable............ : 0 (disabled)
 - FORCEPR# Interrupt Enable............ : 0 (disabled)
 - Critical Temperature Interrupt Enable : 1 (enabled)
 - Threshold #1 Value................... : 0
 - Threshold #1 Interrupt Enable........ : 0 (disabled)
 - Threshold #2 Value................... : 0
 - Threshold #2 Interrupt Enable........ : 0 (disabled)
 - Power Limit Notification Enable...... : 0 (disabled)
IA32_THERM_STATUS................(0x19C) : 0x88330000
------------------------------------------
 - Thermal Status....................... : 0
 - Thermal Log.......................... : 0
 - PROCHOT # or FORCEPR# event.......... : 0
 - PROCHOT # or FORCEPR# log............ : 0
 - Critical Temperature Status.......... : 0
 - Critical Temperature log............. : 0
 - Thermal Threshold #1 Status.......... : 0
 - Thermal Threshold #1 log............. : 0
 - Thermal Threshold #2 Status.......... : 0
 - Thermal Threshold #2 log............. : 0
 - Power Limitation Status.............. : 0
 - Power Limitation log................. : 0
 - Current Limit Status................. : 0
 - Current Limit log.................... : 0
 - Cross Domain Limit Status............ : 0
 - Cross Domain Limit log............... : 0
 - Digital Readout...................... : 51
 - Resolution in Degrees Celsius........ : 1
 - Reading Valid........................ : 1 (valid)
MSR_THERM2_CTL...................(0x19D) : 0x0
IA32_MISC_ENABLES................(0x1A0) : 0x850089
------------------------------------------
 - Fast-Strings......................... : 1 (enabled)
 - FOPCODE compatibility mode Enable.... : 0
 - Automatic Thermal Control Circuit.... : 1 (enabled)
 - Split-lock Disable................... : 0
 - Performance Monitoring............... : 1 (available)
 - Bus Lock On Cache Line Splits Disable : 0
 - Hardware prefetch Disable............ : 0
 - Processor Event Based Sampling....... : 0 (PEBS supported)
 - GV1/2 legacy Enable.................. : 0
 - Enhanced Intel SpeedStep Technology.. : 1 (enabled)
 - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
 - Adjacent sector prefetch Disable..... : 0
 - CFG Lock............................. : 0 (MSR not locked)
 - xTPR Message Disable................. : 1 (disabled)
MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x1640000
------------------------------------------
 - Turbo Attenuation Units.............. : 0
 - Temperature Target................... : 100
 - TCC Activation Offset................ : 1
MSR_MISC_PWR_MGMT................(0x1AA) : 0x4018C1
------------------------------------------
 - EIST Hardware Coordination........... : 1 (hardware coordination disabled)
 - Energy/Performance Bias support...... : 1
 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
 - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)
MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x1F202123
------------------------------------------
 - Maximum Ratio Limit for C01.......... : 23 (3500 MHz)
 - Maximum Ratio Limit for C02.......... : 21 (3300 MHz)
 - Maximum Ratio Limit for C03.......... : 20 (3200 MHz)
 - Maximum Ratio Limit for C04.......... : 1F (3100 MHz)
IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x5
------------------------------------------
 - Power Policy Preference...............: 5 (balanced performance and energy saving)
MSR_POWER_CTL....................(0x1FC) : 0x124005F
------------------------------------------
 - Bi-Directional Processor Hot..........: 1 (enabled)
 - C1E Enable............................: 1 (enabled)
MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
 - Power Units.......................... : 3 (1/8 Watt)
 - Energy Status Units.................. : 14 (61 micro-Joules)
 - Time Units .......................... : 10 (976.6 micro-Seconds)
MSR_PKG_POWER_LIMIT..............(0x610) : 0x4281E000DD8168
------------------------------------------
 - Package Power Limit #1............... : 45 Watt
 - Enable Power Limit #1................ : 1 (enabled)
 - Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1)
 - Time Window for Power Limit #1....... : 110 (163840 milli-Seconds)
 - Package Power Limit #2............... : 60 Watt
 - Enable Power Limit #2................ : 1 (enabled)
 - Package Clamping Limitation #2....... : 0 (disabled)
 - Time Window for Power Limit #2....... : 33 (10 milli-Seconds)
 - Lock................................. : 0 (MSR not locked)
MSR_PKG_ENERGY_STATUS............(0x611) : 0x6FCAE6D
------------------------------------------
 - Total Energy Consumed................ : 7154 Joules (Watt = Joules / seconds)
MSR_PP1_POWER_LIMIT..............(0x640) : 0x0
MSR_PP1_ENERGY_STATUS............(0x641) : 0x124F81
------------------------------------------
 - Total Energy Consumed................ : 73 Joules (Watt = Joules / seconds)
MSR_PP1_POLICY...................(0x642) : 0x18
------------------------------------------
 - Priority Level....................... : 24
MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x19
MSR_CONFIG_TDP_LEVEL1............(0x649) : 0x100118
MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0x0
MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x0
MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0
MSR_PKGC3_IRTL...................(0x60a) : 0x884E
MSR_PKGC6_IRTL...................(0x60b) : 0x8876
MSR_PKGC7_IRTL...................(0x60c) : 0x8894
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0xF595E76B71
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x1B5B0E2147E
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0xF595E76B71
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x1B5B0E2147E
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0
MSR_PKG_C7_RESIDENCY.............(0x3fa) : 0x0
MSR_PLATFORM_ENERGY_COUNTER......(0x64D) : 0x0 (not supported by hardware/BIOS)
MSR_PPERF........................(0x64E) : 0x69CAE0086A
------------------------------------------
 - Hardware workload scalability........ : 454375245930
MSR_CORE_PERF_LIMIT_REASONS......(0x64F) : 0x30001000
------------------------------------------
 - PROCHOT Status....................... : 0
 - Thermal Status....................... : 0
 - Residency State Regulation Status.... : 0
 - Running Average Thermal Limit Status. : 0
 - VR Therm Alert Status................ : 0
 - VR Therm Design Current Status....... : 0
 - Other Status......................... : 0
 - Package/Platform-Level #1 Power Limit : 0
 - Package/Platform-Level #2 Power Limit : 0
 - Max Turbo Limit Status............... : 1 (frequency reduced below OS request due to multi-core turbo limits)
 - Turbo Transition Attenuation Status.. : 0
 - PROCHOT Log.......................... : 0
 - Thermal Log.......................... : 0
 - Residency State Regulation Log....... : 0
 - Running Average Thermal Limit Log.... : 0
 - VR Therm Alert Log................... : 0
 - VR Thermal Design Current Log........ : 0
 - Other Status Log..................... : 0
 - Package/Platform-Level #1 Power Limit : 0
 - Package/Platform-Level #2 Power Limit : 0
 - Max Turbo Limit Log.................. : 1 (status bit has asserted)
 - Turbo Transition Attenuation Log..... : 1 (status bit has asserted)
IA32_TSC_DEADLINE................(0x6E0) : 0x438E7A98121
(HWP Supported but not (yet) enabled)
CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......:  8 ( 800 MHz)
Maximum non-Turbo Ratio/Frequency........: 25 (2500 MHz)
Maximum Turbo Ratio/Frequency............: 35 (3500 MHz)
IGPU Info:
------------------------------------------
IGPU Current Frequency...................: 1050 MHz
IGPU Minimum Frequency...................:  350 MHz
IGPU Maximum Non-Turbo Frequency.........:  350 MHz
IGPU Maximum Turbo Frequency.............: 1000 MHz
IGPU Maximum limit.......................: No Limit
P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ (10) 13 17 ] iGPU P-States [ ]
CPU C3-Cores [ 0 3 ]
CPU C7-Cores [ 0 1 3 ]
CPU P-States [ (10) 12 13 17 ] iGPU P-States [ ]
CPU C3-Cores [ 0 2 3 ]
CPU C7-Cores [ 0 1 2 3 ]
CPU P-States [ 10 12 13 17 18 (25) ] iGPU P-States [ ]
CPU C3-Cores [ 0 1 2 3 ]
CPU P-States [ 10 12 (13) 16 17 18 25 ] iGPU P-States [ ]
CPU P-States [ 10 12 13 15 16 17 18 (25) ] iGPU P-States [ ]
CPU P-States [ (10) 12 13 14 15 16 17 18 25 ] iGPU P-States [ ]
CPU P-States [ 10 (11) 12 13 14 15 16 17 18 22 25 ] iGPU P-States [ ]
CPU P-States [ (8) 10 11 12 13 14 15 16 17 18 22 25 ] iGPU P-States [ ]
CPU P-States [ 8 10 11 12 (13) 14 15 16 17 18 19 22 25 ] iGPU P-States [ ]
CPU P-States [ 8 (10) 11 12 13 14 15 16 17 18 19 22 25 ] iGPU P-States [ (21) ]
CPU P-States [ 8 10 11 12 13 14 15 16 17 18 19 22 25 (31) ] iGPU P-States [ (21) ]
CPU P-States [ 8 10 11 12 13 14 15 16 17 18 19 22 25 31 (33) ] iGPU P-States [ 21 ]

Her şey doğru mu hocam?

montezuma · 29 May 2018

hamzadural' Alıntı:
Her şey doğru mu hocam?

Doğru.

fresky · 29 May 2018

montezuma' Alıntı:
iMac 14,xx sürümler ile dene.

Hocam uzun uğraşlar sonucu x86platform yüklendi.Fakat bu seferde işlemci high performance modunda kaldı ve frekansı 3.8 4.2 arası değişiyor daha aşağılara düşmüyor boşta olsa bile.

Kod:

Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 0
logCStates...............................: 1
logIPGStyle..............................: 1
InitialTSC...............................: 0x1cba063943a (49 MHz)
MWAIT C-States...........................: 270624
Processor Brandstring....................: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz
Processor Signature..................... : 0x306C3
------------------------------------------
 - Family............................... : 6
 - Stepping............................. : 3
 - Model................................ : 0x3C (60)
Model Specific Registers (MSRs)
------------------------------------------
MSR_CORE_THREAD_COUNT............(0x35)  : 0x28
------------------------------------------
 - Core Count........................... : 4
 - Thread Count......................... : 8
MSR_PLATFORM_INFO................(0xCE)  : 0x80838F3012800
------------------------------------------
 - Maximum Non-Turbo Ratio.............. : 0x28 (4000 MHz)
 - Ratio Limit for Turbo Mode........... : 1 (programmable)
 - TDP Limit for Turbo Mode............. : 1 (programmable)
 - Low Power Mode Support............... : 0 (LMP not supported)
 - Number of ConfigTDP Levels........... : 0 (only base TDP level available)
 - Maximum Efficiency Ratio............. : 8
 - Minimum Operating Ratio.............. : 8
MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x1E000400
------------------------------------------
 - I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT)
 - CFG Lock............................. : 0 (MSR not locked)
 - C3 State Auto Demotion............... : 1 (enabled)
 - C1 State Auto Demotion............... : 1 (enabled)
 - C3 State Undemotion.................. : 1 (enabled)
 - C1 State Undemotion.................. : 1 (enabled)
 - Package C-State Auto Demotion........ : 0 (disabled/unsupported)
 - Package C-State Undemotion........... : 0 (disabled/unsupported)
MSR_PMG_IO_CAPTURE_BASE..........(0xE4)  : 0x21814
------------------------------------------
 - LVL_2 Base Address................... : 0x1814
 - C-state Range........................ : 2 (C7 is the max C-State to include)
IA32_MPERF.......................(0xE7)  : 0x3BF28C2DD0
IA32_APERF.......................(0xE8)  : 0x3FBF5AE045
MSR_FLEX_RATIO...................(0x194) : 0x1E0000
------------------------------------------
MSR_IA32_PERF_STATUS.............(0x198) : 0x278700002B00
------------------------------------------
 - Current Performance State Value...... : 0x2B00 (4300 MHz)
MSR_IA32_PERF_CONTROL............(0x199) : 0x2C00
------------------------------------------
 - Target performance State Value....... : 0x2C00 (4400 MHz)
 - Intel Dynamic Acceleration........... : 0 (IDA engaged)
IA32_CLOCK_MODULATION............(0x19A) : 0x0
IA32_THERM_INTERRUPT.............(0x19B) : 0x10
------------------------------------------
 - High-Temperature Interrupt Enable.... : 0 (disabled)
 - Low-Temperature Interrupt Enable..... : 0 (disabled)
 - PROCHOT# Interrupt Enable............ : 0 (disabled)
 - FORCEPR# Interrupt Enable............ : 0 (disabled)
 - Critical Temperature Interrupt Enable : 1 (enabled)
 - Threshold #1 Value................... : 0
 - Threshold #1 Interrupt Enable........ : 0 (disabled)
 - Threshold #2 Value................... : 0
 - Threshold #2 Interrupt Enable........ : 0 (disabled)
 - Power Limit Notification Enable...... : 0 (disabled)
IA32_THERM_STATUS................(0x19C) : 0x88370000
------------------------------------------
 - Thermal Status....................... : 0
 - Thermal Log.......................... : 0
 - PROCHOT # or FORCEPR# event.......... : 0
 - PROCHOT # or FORCEPR# log............ : 0
 - Critical Temperature Status.......... : 0
 - Critical Temperature log............. : 0
 - Thermal Threshold #1 Status.......... : 0
 - Thermal Threshold #1 log............. : 0
 - Thermal Threshold #2 Status.......... : 0
 - Thermal Threshold #2 log............. : 0
 - Power Limitation Status.............. : 0
 - Power Limitation log................. : 0
 - Current Limit Status................. : 0
 - Current Limit log.................... : 0
 - Cross Domain Limit Status............ : 0
 - Cross Domain Limit log............... : 0
 - Digital Readout...................... : 55
 - Resolution in Degrees Celsius........ : 1
 - Reading Valid........................ : 1 (valid)
MSR_THERM2_CTL...................(0x19D) : 0x0
IA32_MISC_ENABLES................(0x1A0) : 0x850089
------------------------------------------
 - Fast-Strings......................... : 1 (enabled)
 - FOPCODE compatibility mode Enable.... : 0
 - Automatic Thermal Control Circuit.... : 1 (enabled)
 - Split-lock Disable................... : 0
 - Performance Monitoring............... : 1 (available)
 - Bus Lock On Cache Line Splits Disable : 0
 - Hardware prefetch Disable............ : 0
 - Processor Event Based Sampling....... : 0 (PEBS supported)
 - GV1/2 legacy Enable.................. : 0
 - Enhanced Intel SpeedStep Technology.. : 1 (enabled)
 - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
 - Adjacent sector prefetch Disable..... : 0
 - CFG Lock............................. : 0 (MSR not locked)
 - xTPR Message Disable................. : 1 (disabled)
MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x641400
------------------------------------------
 - Turbo Attenuation Units.............. : 0
 - Temperature Target................... : 100
 - TCC Activation Offset................ : 0
MSR_MISC_PWR_MGMT................(0x1AA) : 0x400001
------------------------------------------
 - EIST Hardware Coordination........... : 1 (hardware coordination disabled)
 - Energy/Performance Bias support...... : 1
 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
 - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)
MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x2A2B2C2C
------------------------------------------
 - Maximum Ratio Limit for C01.......... : 2C (4400 MHz)
 - Maximum Ratio Limit for C02.......... : 2C (4400 MHz)
 - Maximum Ratio Limit for C03.......... : 2B (4300 MHz)
 - Maximum Ratio Limit for C04.......... : 2A (4200 MHz)
IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x1
------------------------------------------
 - Power Policy Preference...............: 1 (highest performance)
MSR_POWER_CTL....................(0x1FC) : 0x4005F
------------------------------------------
 - Bi-Directional Processor Hot..........: 1 (enabled)
 - C1E Enable............................: 1 (enabled)
MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
 - Power Units.......................... : 3 (1/8 Watt)
 - Energy Status Units.................. : 14 (61 micro-Joules)
 - Time Units .......................... : 10 (976.6 micro-Seconds)
MSR_PKG_POWER_LIMIT..............(0x610) : 0x4282A8001C82A0
------------------------------------------
 - Package Power Limit #1............... : 84 Watt
 - Enable Power Limit #1................ : 1 (enabled)
 - Package Clamping Limitation #1....... : 0 (disabled)
 - Time Window for Power Limit #1....... : 14 (40960 milli-Seconds)
 - Package Power Limit #2............... : 85 Watt
 - Enable Power Limit #2................ : 1 (enabled)
 - Package Clamping Limitation #2....... : 0 (disabled)
 - Time Window for Power Limit #2....... : 33 (10 milli-Seconds)
 - Lock................................. : 0 (MSR not locked)
MSR_PKG_ENERGY_STATUS............(0x611) : 0x9499DB4
------------------------------------------
 - Total Energy Consumed................ : 9510 Joules (Watt = Joules / seconds)
MSR_PP0_POWER_LIMIT..............(0x638) : 0x0
MSR_PP0_ENERGY_STATUS............(0x639) : 0x653615D
------------------------------------------
 - Total Energy Consumed................ : 6477 Joules (Watt = Joules / seconds)
MSR_PP0_POWER_LIMIT..............(0x638) : 0x0
MSR_PP0_ENERGY_STATUS............(0x639) : 0x6536261
------------------------------------------
 - Total Energy Consumed................ : 6477 Joules (Watt = Joules / seconds)
MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x28
MSR_CONFIG_TDP_LEVEL1............(0x649) : 0x0
MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0x0
MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x80000000
MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0
MSR_PKGC3_IRTL...................(0x60a) : 0x8842
MSR_PKGC6_IRTL...................(0x60b) : 0x8873
MSR_PKGC7_IRTL...................(0x60c) : 0x8891
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x0
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x0
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x0
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x0
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0
MSR_PKG_C7_RESIDENCY.............(0x3fa) : 0x0
IA32_TSC_DEADLINE................(0x6E0) : 0x1CBA65F64F4
CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......:  8 ( 800 MHz)
Maximum non-Turbo Ratio/Frequency........: 40 (4000 MHz)
Maximum Turbo Ratio/Frequency............: 44 (4400 MHz)
P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ 39 (44) ]
CPU C3-Cores [ 0 1 4 6 7 ]
CPU C6-Cores [ 0 1 3 5 6 ]
CPU C7-Cores [ 0 1 2 4 5 7 ]
CPU P-States [ 39 42 (43) 44 ]
CPU C3-Cores [ 0 1 3 4 5 6 7 ]
CPU C6-Cores [ 0 1 2 3 5 6 7 ]
CPU C7-Cores [ 0 1 2 4 5 6 7 ]
CPU C3-Cores [ 0 1 2 3 4 5 6 7 ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 ]
CPU P-States [ 39 (40) 42 43 44 ]
CPU C7-Cores [ 0 1 2 3 4 5 6 7 ]
CPU P-States [ (8) 39 40 41 42 43 44 ]
CPU P-States [ 8 37 39 40 41 (42) 43 44 ]
CPU P-States [ (8) 29 37 39 40 41 42 43 44 ]
CPU P-States [ 8 29 36 37 39 40 41 42 43 (44) ]
CPU P-States [ (8) 24 29 36 37 39 40 41 42 43 44 ]
CPU P-States [ (8) 21 24 29 36 37 39 40 41 42 43 44 ]
CPU P-States [ 8 21 24 27 29 36 37 39 (40) 41 42 43 44 ]
CPU P-States [ (8) 21 23 24 27 29 36 37 39 40 41 42 43 44 ]
CPU P-States [ 8 21 22 23 24 27 29 36 37 39 40 41 42 43 (44) ]
CPU P-States [ (8) 18 21 22 23 24 27 29 36 37 39 40 41 42 43 44 ]
CPU P-States [ (8) 18 21 22 23 24 27 29 36 37 38 39 40 41 42 43 44 ]
CPU P-States [ (8) 18 21 22 23 24 27 29 34 36 37 38 39 40 41 42 43 44 ]
CPU P-States [ 8 18 21 22 23 24 25 27 29 34 36 37 38 39 (40) 41 42 43 44 ]
CPU P-States [ (8) 16 18 21 22 23 24 25 27 29 34 36 37 38 39 40 41 42 43 44 ]
CPU P-States [ (8) 16 18 20 21 22 23 24 25 27 29 34 36 37 38 39 40 41 42 43 44 ]
CPU P-States [ (8) 16 18 20 21 22 23 24 25 26 27 29 34 36 37 38 39 40 41 42 43 44 ]
CPU P-States [ 8 16 18 20 21 22 23 24 25 26 27 29 30 34 36 37 38 39 40 41 42 43 (44) ]
CPU P-States [ (8) 16 18 19 20 21 22 23 24 25 26 27 29 30 34 36 37 38 39 40 41 42 43 44 ]
CPU P-States [ (8) 16 18 19 20 21 22 23 24 25 26 27 29 30 32 34 36 37 38 39 40 41 42 43 44 ]
CPU P-States [ 8 16 18 19 20 21 22 23 24 25 26 27 29 30 32 33 34 36 37 38 39 40 41 42 43 (44) ]
CPU P-States [ (8) 16 18 19 20 21 22 23 24 25 26 27 28 29 30 32 33 34 36 37 38 39 40 41 42 43 44 ]

Yukardaki kodun bir bölümünde "- Power Policy Preference...............: 1 (highest performance)" yazıyor. sanırım onun balanced olması lazım.Nasıl yapcaz

kerem5334 · 1 Ağu 2018

Hocam herşey yolundamı sizce?

	Benzer konular	Forum
	OpenCore İle Hackintosh Cihazlarda Uyku Problemlerini Düzeltme	OpenCore Rehberler
	OpenCore ile Hackintosh Cihazlarda Güç Yönetimi	OpenCore Rehberler
	Hackintosh Laptop Cihazlarda Pil Göstergesi için DSDT Yamalamak	OS X INFO KÜTÜPHANESİ
	MacOS Mojave'da AppleALC.kext ile Hackintosh Cihazlarda Ses Aktif Etmek	OS X INFO KÜTÜPHANESİ
	Hackintosh Cihazlarda Anti Virus Programı Kullanılmalı mı?	Hackintosh Soru-Cevap

Hackintosh Cihazlarda Güç Yönetimi

APPRENTICE

MASTER YODA

APPRENTICE

APPRENTICE

MASTER YODA

APPRENTICE

APPRENTICE

MASTER YODA

PADAVAN

APPRENTICE

MASTER YODA

APPRENTICE

MASTER YODA

APPRENTICE

MASTER YODA

APPRENTICE

PADAVAN

MASTER YODA

APPRENTICE

APPRENTICE

Benzer konular